Sharp LC-37HV4M Viewing an image from a PC, Connecting a PC, Displaying an image from a PC

Using external equipment

Viewing an image from a PC

Connecting a PC

Use the PC terminals to connect a PC.

NOTE

•The PC input terminals are DDC1/2B-compatible.

•Refer to page 67 for a list of PC signals compatible with the System.

AVC System (front view)

RGB cable (commercially available)

ø 3.5 mm stereo minijack cable	PC
(commercially available)

Signal names for 15-pin mini D-sub connecter

5 4 3 2 1

10	9	8	7	6
15	14	13	12	11

Pin No.	Signal name	Pin No.	Signal name	Pin No.	Signal name
1	R	6	GND (Ground)	q	Not connected
2	G	7	GND (Ground)	w	SDA
3	B	8	GND (Ground)	e	HD
4	Not connected	9	+5V	r	VD
5	CSYNC	0	GND (Ground)	t	SCL

NOTE

•Macintosh adaptor may be required for use for some Macintosh computers.

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

PC

Displaying an image from a PC

To view an image from a PC, select “PC” from the “INPUT SOURCE” menu using b on the remote control unit or INPUT on the Display.

When connecting to a PC, the correct input signal type is automatically detected. (See page 55.) If the PC image does not come in clearly, you may need to set the Auto Sync. adjustment in the “Setup” menu. (See page 50.)

NOTE

•Each time bis pressed, the input source toggles.

45