Sharp LC-37HV4M operation manual Where to place the System, Setting the System in place

Preparation

Where to place the System

“System” means the Display and AVC System. First select the location where to place the System.

1 Selecting the location of the System

• Select a place with no direct sunlight and good ventilation.

• The Display and the AVC System are connected by the system cable. (See page 8 for details.)

	System cable
	If you want to keep a longer distance between the AVC System
Display	Display and AVC System, please purchase the
	optional system cable AN-07SC1 (about 7 meters).
	(See page 70.)

2 Setting the System in place

Handling the Display

CAUTION

• The Display is very heavy. Move it with two or more people.

• Do not remove the stand from the Display unless using an optional bracket to mount it.

• When moving, put your hands on the Display, but never on the Display speakers.

• Keep enough space above and behind the Display.

Handling the AVC System CAUTION

CAUTION	Adjust the screen with both
• Do not put a VCR or other device on the AVC System.	hands. Put one hand on the
	Display and tilt the screen
• Keep enough space above and on the sides of the AVC System.
	while steadying the stand
• Do not block the ventilation openings on the top and left side,	with your other hand.
	You can adjust the screen
and the exhaust fan on the right side.
	vertically up to 4 degrees
• Do not spread a thick cloth beneath the AVC System, or cover it
	forward or 6 degrees back-
with one, as this can cause overheating and result in malfunction.	ward, or rotate 10 degrees
	horizontally.
10 cm
or more
Keep enough space
5 cm or more
5 cm or more
on both sides
	There is an exhaust fan
	on the right side.
	7