Sharp LC-37HV4M Basic adjustment settings Power Control for PC source, Power management

Basic adjustment settings

Power Control for PC source

Power Control allows you to reduce display brightness and save energy.

Power save

1 Press MENU and the PC MENU screen displays.

Power management

When set, the power will automatically shut down.

1 Press MENU and the PC MENU screen displays.

2 Press c/dto select “Power control”.

• Power control menu displays.

3 Press a/bto select “Power Management”, and then press ENTER.

PC MENU

Power Control Setup

Power Save	[Manual]
Power Management	[Off]

4 Press a/b to select “Mode1” or “Mode2”, and then press ENTER.

2 Press c/dto select “Power Control”.

• Power control menu displays.

3 Press a/bto select “Power Save”, and then press ENTER.

PC MENU

Power Control Setup

PC MENU

Power Control

Power Management

Off

Mode1

Mode2

Power Save	[Manual]
Power Management	[Off]

4	Press c/d to select the desired backlight
	brightness, and then press ENTER.
		PC MENU
			Power Control
		Power Save
			Manual [0] –4	+4
			Auto

Selected item		Description
Off	• No power management
	•	Factory preset value.
	•	If no signal inputs for 8 minutes, the power
		shuts down.
	•	Even if you start using the PC and the signal
Mode1		inputs again, the System stays off.
	• The System turns on again by pressing B
		(STANDBY/ON) button on the Display or B
		on the remote control unit. (See page 16.)
	•	If no signal inputs for 8 seconds, the power
Mode2		shuts down.
	• When you start using the PC and the signal
		inputs again, the System turns on.

NOTE

•When setting to “Auto”, the OPC indicator lights up green, senses the surrounding light and automatically adjusts the backlight brightness. Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.

•Power Save can be set differently for AV input mode and PC input mode.

39