Watching TV

Simple button operation for

Sleep timer

changing volume/sound

Allows you to set a time when the TV automatically

 

 

switches to standby.

1

Press SLEEP.

• Remaining time displays when sleep timer has

 

 

been set.

Changing the volume

You can change the volume on the TV or on the remote control unit.

To increase the volume, press VOLk.

To decrease the volume, press VOLl.

20

NOTE

“TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4” and “PC” modes can store volume adjustment values separately.

Using Mute (e) on the remote control unit

e mutes the current sound output.

1Press e.

The sound is silenced.

M” is displayed while the mute function is on.

Mute

Sleep Timer: Remain 2 hr. 00 min.

2Each time you press SLEEP, the remaining time switches as shown below.

0 hr. 30 min. 1 hr. 00 min. 1 hr. 30 min.

Off 2 hr. 30 min. 2 hr. 00 min.

NOTE

The sleep timer indicator on the TV lights up when the time has been set.

When the time has been set, countdown automatically starts.

Five minutes before the preset of time expires, the remaining time displays each minute.

Select “Off” by pressing SLEEP to cancel the sleep timer.

Still image

You can freeze a motion picture on the screen.

2Press e again within 30 minutes to cancel the mute.

Before 30 minutes, the volume level returns to the previous setting.

NOTE

Within 30 minutes after pressing e, press one of the buttons below to cancel the mute.

VOLl/VOLk

e

Mute will be cancelled after 30 minutes. However, the TV will not suddenly output loud sound as the

volume level will be set to 0 automatically. Increase the volume level by pressing VOLk.

1Press FREEZE.

2Press RETURN to exit still image.

NOTE

When this function is not available, “No still image available.” will display.

The still image automatically goes out after 30 minutes.

PX5X_EN.indb 15

15

2007-5-9 11:43:16

Page 16
Image 16
Sharp LC-46PX5X Still image, Switches to standby, Changing the volume, Using Mute e on the remote control unit