Useful adjustment settings
Audio Only
When listening to music from a music programme, you can set the display off and enjoy audio only.
1Press MENU and the MENU screen displays.
2Press c/d to select “Option”.
3Press a/b to select “Audio Only”, and then press ENTER.
4Press a/b to select “On”, and then press
ENTER.
Selected item | Description |
On | Audio is output without screen image. |
|
|
Off | Both screen images and audio are output. |
|
|
NOTE
•When you make operations that change the picture on the TV such as by changing the input source, the Audio Only function is set to “Off”.
DNR (Digital Noise Reduction)
Produces a clearer video image.
1Press MENU and the MENU screen displays.
2Press c/d to select “Option”.
3Press a/b to select “DNR”, and then press
ENTER.
4Press a/b to select the desired level, and then press ENTER.
Off
High
Low
Input Select
Selecting input source
Can use for selecting the input source.
Using TV/VIDEO in the remote control unit or on the TV
TV/VIDEO allows you to choose from the available input sources.
1Press TV/VIDEO on the remote control unit or TV/VIDEO on the TV.
2Press TV/VIDEO on the remote control unit or TV/VIDEO on the TV to select the input source.
•An image from the selected source automatically displays.
•You can also select the input source by pressing a/b.
Selecting input signal type
For setting the signal type of external equipment.
1Press MENU and the MENU screen displays.
2Press c/d to select “Option”.
3Press a/b to select “Input Select”, and then press ENTER.
4Press a/b to select an input source among “Input1” and “Input2”, and then press ENTER.
5Press a/b to select the desired level, and then press ENTER.
Input source | Selectable item |
Input 1 | Auto, Component, Video |
|
|
Input 2 | Auto, Component, Video |
|
|
NOTE
•If no (colour) image displays, try to change the other signal type.
•Check the operation manual of the external equipment for the signal type.
•When the signal type is set to “Auto”, the input terminal where cable is connected is automatically selected.
•When the signal type is set to “Auto” and multiple video signal cables are connected, the signal type is selected in
the following prioritised order:
Input 1/Input 2: Components Video
33
PX5X_EN.indb 33
