Sharp LC-46PX5X operation manual Fine Sync. adjustment PC input mode only, Phase

Useful adjustment settings

Auto Sync. adjustment (PC input mode only)

For automatically adjusting the PC image.

1Press MENU and the MENU screen displays.

2Press c/d to select “Option”.

3Press a/b to select “PC Setup”, and then press ENTER.

4Press a/b to select “Auto Sync.”, and then press ENTER.

Fine Sync. adjustment (PC input mode only)

Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimise the image.

1Press MENU and the MENU screen displays.

2Press c/d to select “Option”.

3Press a/b to select “PC Setup”, and then press ENTER.

5Press a/b to select “Yes”, and then press

ENTER.

• Auto Sync. starts.

NOTE

•Auto Sync. is likely to succeed when an input PC image has wide vertical stripes (e.g. pattern with high contrast stripes, or cross-hatched).

It may fail when an input PC image is solid (low contrast).

•Be sure to connect the PC to the TV and switch it on before starting Auto Sync.

4	Press a/b to select a specifi c adjustment
	item among “H-Position”, “V-Position”, “Clock”
	and “Phase”.
	Input Signal
	Auto Sync.
	H-Position	[90]	+
	V-Position	[60]	+
	Clock	[90]	+
	Phase	[ 8]	+
	Reset
Selected item			Description

H-Position	Centres the image by moving it to the left
	or right.
V-Position	Centres the image by moving it to the up
	or down.
Clock	Adjusts when the image fl ickers with
	vertical stripes.
Phase	Adjusts when characters have low contrast
	or when the image fl ickers.

5Press c/d to adjust the item to your desired position.

NOTE

•For resetting all adjustment items to factory preset values, press a/b to select “Reset”, and then press ENTER.

•Images may not be displayed properly depending on the settings and/or input signals.

PX5X_EN.indb 37

37

2007-5-9 11:43:23