Sharp LC-46PX5X operation manual Input Label, Image position, Useful adjustment settings, Pos

Useful adjustment settings

Input Label

You can assign each input source a label you like.

1Press TV/VIDEO to select the desired input source.

2Press MENU and the MENU screen displays.

3Press c/d to select “Setup”.

4Press a/b to select “Input Label”, and then press ENTER.

5Press a/b to select characters and c/d to move to the desired digit to label the input source.

•When you want to change the input label that you

have already assigned to the default name, press c/d to move to “CLEAR” on the “Input Label” screen, and then press ENTER.

6Repeat the above until the name is fully spelt out, and then press MENU.

•The name can be 6 characters or less.

•When you want to set an input source name of less than 6 characters, press MENU to exit from the labelling menu.

TV

INPUT1

INPUT2

DVD

INPUT4

(Example)

NOTE

• You cannot change labels if the input source is TV.

Image position

For adjusting a picture's horizontal and vertical position.

1Press MENU and the MENU screen displays.

2Press c/d to select “Setup”.

3Press a/b to select “Position”, and then press ENTER.

4Press a/b to select “H-Pos.” or “V-Pos.”.

H-Pos. [0] +

V-Pos.	[0]	+
Reset

5Press c/d to adjust the item to your desired position.

Selected item	Description
H-Pos.	Centres the image by moving it to the left
	or right.
V-Pos.	Centres the image by moving it up or
	down.

NOTE

•For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press

ENTER.

•Adjustments are stored separately according to input source.

•Images may not be displayed properly depending on the settings and/or input signals.

28

PX5X_EN.indb 28

2007-5-9 11:43:21