45

Displaying an image from a PC

To view an image from a PC, select “PC” using TV/
VIDEO on the remote control unit or TV/VIDEO on the
TV.
When connecting to a PC, the correct input signal type
is automatically detected. (See page 36.)
NOTE
• Each time TV/VIDEO is pressed, the input source toggles.

Viewing an image from a PC

Using external equipment

Connecting a PC

Use the PC terminals to connect a PC.
NOTE
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 46 for a list of PC signals compatible with the TV.
TV
INPUT1
INPUT2

INPUT3

INPUT4

PC

Signal names for 15-pin mini D-sub connector
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No.
5 is not used for inputting the signal.
15 14 13 12
9
11
10
876
54 3 21
Pin No. Signal name Pin No. Signal name Pin No. Signal name
R GND (Ground) Not connected
G GND (Ground) SDA
B GND (Ground) HD
Not connected +5V VD
CSYNC GND (Ground) SCL
PC
ANALOG RGB
AUDIO
RGB cable
(commercially available)
Ø 3.5 mm stereo minijack cable
(commercially available)
PX5X_EN.indb 45PX5X_EN.indb 45 2007-5-9 11:43:252007-5-9 11:43:25