On=Screen Display Menu
For adjusting a picture's horizontal and vertical
position.
H-Pos.: Centers the image bymoving itto the left or
right.
V-Pos.: Centers the imageby moving it up or down.
o For resetting adjustments to the factory preset values,
press A/T to select "Reset", and then press ENTER.
When connecting a PCto the HDMI terminal, the image
position willbe automatically adjusted. It cannot be
manually adjusted.
The screen position variable ranges depend on the View
Mode or the signal type. Theranges can be seen on the
position-setting screen.
Adjustments are stored separately according to input
SOUrCe.
You can also select alanguage from the Setup menu.Select from among 3 languages: English, French andSpanish.When this function is set to "On", the LED on the frontof the TV turns on.
"On" is the factory preset value. If you wantto turn off the
LED,set thefunction to "Off".
Ifcomplex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
1 "Return to the factory preset values" displays on the
screen.
o Ifyou have already set the Secret No., input the 4-digit
secret number here.
2 Select "Yes".
o "Now, TVwill restartautomatically. OK?" displays on the
screen.
3 Select "Yes".
o "Now initializing..." displays on the screenand blinks.
After the reset has been completed, the power shuts off
and then comes back on. The screen willhave returned
to its original settings.
The Channel Setup settings will not be changed.
The Language settings will not be changed.
The Secret number settings will not be changed.
The TV Location settings will not be changed.
Allows you to usea secret number to protect certainsettings from being accidentally changed.
iMPORTANT:
Three conditions must be met to enable the V-Chip (see
pages 26 to 27):
1. Secret No. is registered.
2. V-Chip/V-Chip (DTVOnly) settings have been made.
®The "V-Chip (D_/Only)" will only be selectablewhen a new
ratingsystemcarl be downloaded via digital broadcasting in the
U.S.
3. "Status" is set to "On".
==New Secret No.
You can set and change the secret number by using
0-9.
Input Secret No.: When you change the secret number,
enter the old 4-digit secret number here.The cursor
moves to "New Secret No.".
New Secret No.: When you set the new secret number,
enter the new 4-digit secret number here. The cursor
moves to "Reconfirm".
Reconfirm: Enter the same 4-digit number you set in
"New Secret No.".
Secret No. Clear
You can clear your secret number.
Yes: Your secret number is cleared.
No: Your secret number is not cleared.
As a precautionary measure, make anote ofyour secret
number and keep it in a familiar place.
Ifthe secret number is cleared, the Status setting
automatically sets to "Off". "V-Chip" and "Status" will not
be selectable from the menu.
Used to enable or disable the parental control function.This function will not be selectable from the menu ifyou do not first configure your secret number.On: EnablesParentalCTRL.Off: DisablesParentalCTRL.Q- 25