On=Screen Display Menu
Adjusts the picture to your preference with the
following _icture settings.
Example
Automatically adjusts the brightness of the screen.
Off: The brightness isfixed at the value set in "Backlight".
On: Automatically adjusts.
On: Display: Displays the OPC effect on the screen while
adjusting the brightness ofthe screen.
Picture ] = Whenset to "On", theOptical Picture Control (OPC)
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure nothing obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
= When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
= When set to "On" or "On: Display", the OPC indicator on
the TV lights green.
l FREEZi MENU
1 Press MENU to display the MENU screen, and then
press 4/1_ to select "Picture".
2 Press A/V to select aspecific adjustment item.
Select "Advanced" and then press ENTER to set
"C.MS.-Hue", "C. MS.-Saturation", "C.M.S.-Value",
"Color Temp.", "Fine Motion Enhanced", "Active
Contrast", "Gamma Adjustment", "Black Level",
"Film Mode", "Digital Noise Reduction", "3D-Y/C",
"Monochrome" or "Range of OPC".
3Press A/T(or _1/1_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Backlight The screen dims
Contrast For lesscontrast
Brightness For less
brightness
Color For less color
intensity
Tint Skin tones
become reddish
Sharpness For less
sharpness
Forresetting all Picture adjustment items to the factory
preset values, press h,/T to select "Reset", press ENTER,
press 4/1_ to select "Yes", and then press ENTER.
The screen
brightens
Formore contrast
Formore
brightness
Formore color
intensity
Skintones
become greenish
Formore
sharpness
This TV provides various advanced functions foroptimizing the picture quality.
©clot tone is managed using the six-color adjustment
setting.
C.M.S.-Hue: This is a standard to adjust the color either
more reddish or more bluish intone.
C.M.S.=Saturation: Increases or decreases the
saturation ofa selected color.
C.M.S.-Value: A higher value makes the image brighter.
Alower value makes the image darker.
= For resetting alladjustment items to the factory preset
values, press A/T to select "Reset", and then press
ENTER.
For a better white balance, use color temperature
correction.
High: Whitewith bluish tone
Mid-High:
Middle:
Mid-Low:
Low: White with reddish tone
White balance can be adjusted between a maximum of
+30 and a minimum of -30 for each color temperature.
RGain (LO/HI): -30 through +30
G Gain (LO/HI): -30 through +30
BGain (LO/HI}: -30 through +30
= For resetting alladjustment items to the factory preset
values, press h,/T to select "Reset", and then press
ENTER.
Q-21