Connecting to External Equipment

You can connect many types of external equipment to your TV. To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. (See pages 10 and 15.)

For connecting the TV to external equipment, use commercially available cables.

CAUTION

To protect equipment, always turn off the TV before connecting any external equipment.

Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.

NOTE

When connecting 4K equipment to the TV, use the HDMI IN 1, 2, 3 or 4 terminal (3840 x 2160 (Ultra HD) 30Hz, 25Hz, 24Hz are available.).

Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box

When using an HDMI cable (HDMI IN 1, 2, 3 or 4):

The HDMI (High Defi nition Multimedia Interface) terminal is an audio-video interface that enables a connection for audio and video signals using a single cable. The HDMI IN terminal supports high-resolution video input.

Blu-ray disc player

• DVD player

• HD cable/satellite set-top box

 

 

 

HDMI-certified cable

For 4K (UHD) signal: HDMI 1.4 (same as for 3D) (High speed type)

HDMI OUT

When using a Component cable (COMPONENT IN):

Blu-ray disc player • DVD player

• HD cable/satellite set-top box

 

Audio cable

 

AUDIO-R (Red)

 

AUDIO-L (White)

 

COMPONENT OUT

PR (Red)

Y (Green)

 

 

PB (Blue)

 

Component video cable

NOTE

To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a component cable and set the equipment to 1080p output.

Connecting a VCR, Game Console, Camcorder or Cable/Satellite Set-top Box

When using a Composite cable (VIDEO IN 1 or 2):

• Game console

• VCR

• Camcorder

• Cable/Satellite set-top box

 

 

NOTE

VIDEO (Yellow)

AUDIO-L (White)

AV cable

To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a component cable and set the equipment to 1080p output.

Supported Audio format: Linear PCM, Dolby Digital, DTS, sampling rate 32/44.1/48kHz.

When you connect ARC-compatible equipment, use HDMI IN 1.

When using a DVI-HDMI conversion cable (HDMI IN 2):

Blu-ray disc player

• DVD player

• HD cable/satellite set-top box

 

 

 

DVI-HDMI conversion cable

Ø 3.5 mm stereo minijack cable

AUDIO OUT DVI OUT

NOTE

AUDIO-R (Red)

• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to connecting a DVI-HDMI conversion cable to the HDMI IN 2 terminal, connect a Ø 3.5 mm stereo minijack cable to

the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 41.)

11

 

Page 13
Image 13
Sharp LC-70UD1U, LC70UD1U operation manual Connecting to External Equipment