Sharp LC-70UD1U, LC70UD1U Picture Settings, OPC Setting, AV Mode Changing Pic.Quality

On-Screen Display Menu

Picture Settings

Adjusts the picture to your preference with the following picture settings.

NOTE

• For operating the on-screen display menu, see page 19.

Selected item	c button	d button
Backlight	The screen	The screen
	dims	brightens
Contrast	For less	For more
	contrast	contrast
Brightness	For less	For more
	brightness	brightness
Color	For less color	For more color
	intensity	intensity
Tint	Skin tones	Skin tones
	become	become
	reddish	greenish
Sharpness	For less	For more
	sharpness	sharpness

•For resetting all Picture adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press a/b to select "Yes", and then press

ENTER.

OPC Setting

Automatically adjusts the brightness of the screen.

Off: The brightness is fi xed at the value set in "Backlight".

On: Automatically adjusts.

On:Display: Displays the OPC effect on the screen while adjusting the brightness of the screen.

NOTE

•When set to "On", the Optical Picture Control (OPC) senses the surrounding light and automatically adjusts the backlight brightness. Make sure nothing obstructs the OPC sensor, which could affect its ability to sense surrounding light.

•When set to "On:Display", OPC effect displays on the screen while the OPC adjusts the screen brightness.

OPC:

OPC:

Color Temp. (Color Temperature)

For a better white balance, use color temperature correction.

High: White with bluish tone

Mid-High:

Middle:

Mid-Low:

Low: White with reddish tone

Low (Xenon), Low (Carbon arc): Available only when AV MODE is set to "MOVIE" MODE. Use one of these items to make picture color become more reddish.

White balance can be adjusted between a maximum of +30 and a minimum of –30 for each color temperature.

R Gain (LO/HI)/G Gain (LO/HI)/B Gain (LO/HI)

■Fine tuning the color temperature

To fi ne tune the color temperature, set "10 Point Setting" to "On".

You can adjust the "Position" setting. Adjust the set color temperature from +1 to +10.

White balance can be adjusted between a maximum of +30 and a minimum of –30 for each color temperature.

Multiple Pixel Drive

Set this function when two or more people are going to watch a TV program or when you are viewing the screen obliquely.

On: For wider viewing angle.

Off: Normally choose this.

Gamma Adjustment

Adjusts the differences of picture tones between bright parts and dark parts. The adjustment range of the gamma can be set to a maximum of +3 and a minimum of –3 by pressing c or d.

Black Level

Adjusts on-screen black level to your preferred level.

High: The black level gets brighter.

Low: The black level gets darker.

NOTE

•"Black Level" is available for input signal from Composite Video, Component 480i and analog broadcasts (air and cable).

Film Mode (3:2 pull-down)

AV MODE (Changing Pic.Quality)

The audio and video settings can be changed to suit the program or input content being watched.

NOTE

•The selectable items vary depending on the input source.

•For details of the selectable items in 3D mode, see page 31.

•You can select AV MODE by pressing AV MODE on the remote control unit. See page 16 for details of AV MODE settings.

THX Room Mode Setting

Adjust the picture to room illumination or ambient brightness. This function is available only when AV MODE is set to "MOVIE THX".

Advanced Picture Settings

This TV provides various advanced functions for optimizing the picture quality.

Resolution

Adjusts the fi neness (resolution) of the picture in the range 0 to +10.

NOTE

•"Resolution" is not available when you set AV MODE to "PC", "3D" or "GAME (3D)".

•When using any of the HDMI IN 1 to 4 terminals and inputting a 3840 x 2160 signal, you cannot select "Resolution".

Focus

Adjusts the sharpness (crispness) of the picture in the range 0 to +10.

NOTE

•When "Position" is set to "10", you can adjust the white balance between –30 and 0.

•For resetting all adjustment items to the factory preset values, press a/b to select "Reset", and then press

ENTER.

Motion Enhancement

Use Motion Enhancement to view fast-action video more clearly.

Selected item	Description
AquoMotion240	Turn the LED backlight on or
	off for 120Hz drive display.
120Hz High	For obtaining a clearer image.
120Hz Low
Off	Original image.

This function provides high-quality playback of images originally encoded at 24 frames/second, such as fi lms.

Advanced High: Provides smoother image motion while ensuring high-quality playback.

Advanced: Adjusts effect to reduce judder from fi lm contents.

Standard: Plays back images with equal display time for each frame, reproducing movie theater experience.

Off: Normal viewing mode.

NOTE

•"Film Mode" does not function depending on input signal type.

•"Film Mode" does not function when you set AV MODE to "GAME" or "PC".

•"Standard" does not function depending on input signal type.

Bright room: Select this item for a bright room.

Dark room: Select this item for a dark room.

NOTE NOTE

• "Focus" is not available when you set AV MODE to	• "Motion Enhancement" may cause image noise. If this
"PC", "3D" or "GAME (3D)".	occurs, turn the function "Off".
• When using any of the HDMI IN 1 to 4 terminals and	• When AV MODE is set to "GAME" or "PC", or PC
inputting a 3840 x 2160 signal, you cannot select	format is being input, "Motion Enhancement" is not
"Focus".	available.

21