Sharp LC 46BD80UN operation manual Blu-ray disc Setup

On-Screen Display Menu

Blu-ray disc Setup

Audio Video Settings

■Play Format

Set the playback setting for content recorded in 24Hz.

Auto: The content is played back in 24Hz.

Off: The content is played back in 60Hz.

■Secondary Audio

This toggles the clicking sound on the menu and audio with secondary video in picture in picture mode for BD-

VIDEO.

On: BD-VIDEO that includes secondary audio compatible with Picture in Picture can be played back with secondary audio.

Off: Secondary audio does not output.

•"On" is the factory preset value.

•Select “Off” when enjoying the high quality sounds of BD-

VIDEO.

•You cannot change the Secondary Audio setting during playback.

■Digital Audio Out

You can set Digital Audio Out when connecting to SURROUND equipment.

Bitstream: Select this when connecting to SURROUND equipment with a built-in decoder for DOLBY DIGITAL, etc.

Setting to Bitstream will output each audio signal by Bitstream.

PCM: Select this when connecting to 2-channel stereo audio equipment.

Setting to PCM will output by converting each audio signal into PCM 2-channel audio signal.

Playback Setting

■Parental Control

This lets you set the Parental Control depending on the disc content. The available Parental Control Levels are shown below.

The 4-digit password number needs to be entered before the Parental Control Levels and the Country Code are set. The Parental Control Levels and the Country Code cannot be set if a password has not been created or the password is not entered.

For DVD-VIDEO:

8 and Off: All DVD-VIDEO can be played.

1-7:Prohibits play of DVD-VIDEO with corresponding ratings recorded on them.

For BD-ROM:

No Limit: All BD-VIDEO can be played.

0-99 year(s): Prohibits play of BD-VIDEO with

corresponding ratings recorded on them.

Country Code:

Set the Country Code. Refer to the Country Code List (see page 43) because the ratings differ according to the country.

■Disc Language (Disc Priority Language)

This lets you select the language for subtitles, audio and menus displayed on the screen.

Subtitle: Refer to the Language List. (See page 43.)

Audio: Refer to the Language List. (See page 43.)

Menu: Refer to the Language List and the Language Code List. (See page 43.)

■Angle Mark Display

This lets you turn the Angle Mark Display on or off when DVD-VIDEO recorded with multiple angles is played back.

•See page 43 for information on output of next generation audio formats.

■Dynamic Range Control

This lets you adjust the range between the loudest and softest sounds (dynamic range) for playback at average volume. Use this when it is hard to hear dialog.

Normal: The same audio output range is played as the original recorded audio output range.

Shift*: When Dolby Digital audio is played back, the dynamic range of the audio is adjusted so that the dialog portion can be heard easily. (If the audio sounds abnormal, set to “Normal”.)

Yes: The Angle Mark is displayed in the lower right screen.

No: The Angle Mark is not displayed.

■Password Setting

This sets the password for setting or changing the Parental Control Level.

Yes: Enter the 4-digit number.

No: Select this when not setting the password.

*Lower the audio volume before setting. If you do not do so, the speakers may emit a loud sound or excessive output may be applied to the speakers.

42