Sharp LD-26SH3U Setting TV channels (EZ Setup)

Setting TV channels (EZ Setup)

When you turn on the TV for the first time (see page E28), it will automatically memorize the broadcasting channels where you live.

Make sure you have performed the following steps before you turn on the TV.

-Insert the batteries into the remote control. (See page E14.)

-Connect the antenna cable to the TV. (See pages E16 and E17.)

Make sure what kind of connection (receiving mode) is made with your TV.

-Plug in the power cord to the TV and AC outlet. (See page E19.)

2.Press the buttons to select the desired language, and press the ENTER button.

Antenna setting

The air/cable selection screen will be displayed.

EZ Setup

Language
Air/Cable	Selecting Air/Cable channels
CH Search
		Air
		Cable(STD)
		Cable(HRC)
		Cable(IRC)

VOL POWER

POWER

FLASH

BACK

DISPLAY INPUT

3.Press the buttons to select the desired receiving mode, and press the ENTER button.

Channel search

The tuner will search through all available channels in your area and save them to the TV memory.

Note:

- To interrupt the search, press the RETURN

button. It will stop at the current channel.

EZ Setup

Language
Air/Cable	Searching
CH Search
	Air	[ 12]

1.Press the POWER button on the TV to turn on the TV.

When the POWER LED lights red, press the POWER button on the remote control.

Language setting

The language selection screen will be

displayed.
EZ Setup
Language
Air/Cable	Set the on-screen display language
CH Search
	English
	Français
	Español

When the search completes, the search screen becomes off and TV screen becomes minimum channel of TV memory.

Notes:

-You can also select the language using the Setup menu. (See pages E42 and E44, or E47 and E51 for information on using the menus.)

-Even if this setup fails to memorize channels in your area, you can still set the channels using "CH Setup" in the Setup menu. (See pages E32 and E33.)

-EZ Setup will start also after the ALL RESET operation (see the end of this manual).

E20