Other features
Checking your TV's current settings (DISPLAY)
The information displayed will vary depending on the current display mode and other settings.
POWER
DISPLAY INPUT
Switching power off after a specified length of time (SLEEP)
The TV can automatically switch off (standby) after a specified length of time. This is helpful if you want to use the TV at bedtime.
RETURN EXIT MTS MUTE
VIEW MODE PICT MODE CC | FREEZE |
SLEEP
Deutsch English
FLASH
BACK
1.Press the DISPLAY button.
[TV mode]
Display mode, TV channel number, MTS mode, antenna type, CC setting, and
[AV mode]
Display mode, AV input terminal type, input signal resolution, CC setting, and
[PC mode]
Display mode, screen resolution, and horizontal/ vertical frequency will be displayed.
TV Air
Audio : SAP(ST)
CC : Off
Ratings : R
The information will disappear after several seconds.
Note:
-If the TV broadcast changes while the information is displaying, the broadcast and MTS mode may not match.
ON/OFF SIZE/MOVE SWAP SELECT
PIP/SPLIT
1.Press the SLEEP button.
2.Specify in how many minutes you want the TV to switch off by pressing the SLEEP button.
The time changes in the following order each
time you press the button:
Off → 30 min → 60 min → 90 min → 120 min →
150 min → Off
When the specified time elapses, the TV automatically switches off and clears the SLEEP timer.
Checking the time remaining on the SLEEP timer
1.Press the SLEEP button.
The time remaining on the SLEEP timer will be displayed for several seconds.
Changing the specified time
1.Press the SLEEP button.
The remaining time will be displayed.
2.Change the specified time by pressing the SLEEP button several times as needed.
Notes:
-When there are only 5 minutes remaining on the SLEEP timer, the remaining time will be displayed every minute.
-Pressing the POWER button while the SLEEP timer is operating will clear the timer.
-In PC mode, switching to the
English Español Italiano Français
E57