Setting TV channels
Saving broadcast TV channels in the memory (CH Search)
"CH Search" allows you to search through available channels ("Air" or "Cable") in your area. The tuner saves them to TV memory automatically. After performing the steps of Selecting broadcast (Air) or cable TV (Cable) for channel setting on page E32, continue with the following steps.
1. Press the 
buttons to select "CH Search", and press the ENTER button.
|
| MENU | [Setup...CH Setup] |
|
|
| ||
|
|
|
|
|
|
|
|
|
Air/Cable |
|
|
|
|
|
| ||
CH Search |
|
| Searching receivable channels | |||||
CH Memory |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Yes |
| No |
|
|
|
|
|
|
|
|
|
|
2.Press the 
buttons to select "Yes", and press the ENTER button.
The tuner will search through all available channels in your area and save them to the TV memory.
Note:
-To interrupt the search, press the RETURN button.
When the search completes, "CH Search" screen will return.
3.Press the MENU or EXIT button to exit the screen.
Notes:
-Searching channels are: Air channels:
VHF: 2 through 13
UHF: 14 through 69 Cable channels:
1 (HRC and IRC mode only)
2 through 125 (STD, HRC, and IRC)
-During CH Search, the TV will change channels automatically.
-If you search for channels but cannot receive any or if you interrupt the search, the channels that were set previously will be kept.
Setting channels manually (CH Memory)
"CH Memory" allows you to set the channels you want one by one.
After performing the steps of Selecting broadcast (Air) or cable TV (Cable) for channel setting on page E32, continue with the following steps.
1. Press the 
buttons to select "CH Memory", and press the ENTER button.
|
| MENU | [Setup...CH Setup] |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
Air/Cable |
|
|
|
|
|
|
|
|
| ||
CH Search |
|
| Memorizing broadcast channels | ||||||||
CH Memory |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| CH No. |
|
| 11 |
|
| |
|
|
|
|
| Fine Tuning [ | 0 ] |
|
|
|
|
|
|
|
|
|
| Skip |
| On |
| Off |
| |
|
|
|
|
|
|
|
|
|
|
|
|
2.Press the 
buttons to select the desired
adjustment item.
To adjust the value, press the 
buttons. (See the table below for details.)
3.Press the MENU or EXIT button to exit the screen.
Item | Description |
CH No. | Selects the channel to |
| adjust. |
FineTuning | Adjusts the frequency |
| slightly to improve the |
| received signal. |
Skip | Sets the channel to be |
| skipped or not when you |
| select using the CH |
| buttons. |
English Español Italiano Español Français English
E33