Basic operations
Switching display modes (INPUT)
Notes:
-To select AV5 mode, set "DVI Select" to "AV" (factory setting) beforehand using the Option menu. (See pages E42 and E45 for information on using the menus.)
-To select PC DIGITAL mode, set "DVI Select" to "PC" beforehand using the Option menu. (See pages E47 and E52 for information on using the menus.)
Using the INPUT button
1.Press the INPUT button.
"INPUT SOURCE" menu will be displayed.
2.Press the INPUT button to select the desired
mode.
You can also use the 
buttons to select.
Note:
-Between AV1, AV2, and AV3, only the modes whose respective terminals are connected to the external equipment are selectable.
Display modes
Français English
POWER
FLASH
BACK
DISPLAY INPUT
Number TV mode | Displays the TV's image. | |
|
| The number is the |
|
| channel being received. |
AV1 | AV1 mode | Displays the image from |
AV2 | AV2 mode | the equipment connected |
AV3 | AV3 mode | to the respective AV input |
AV4 | AV4 mode | terminals. |
| (HDMI) |
|
AV5 | AV5 mode |
|
| (DVI) |
|
Italiano Español
TV AV
MENUPC
ENTER
CH | VOL |
Using the TV, AV, or PC button
1.Press the TV, AV, or PC button.
The TV will switch to the display mode for the button you pressed.
Notes:
-Each time you press the AV button, the input changes in the order of AV1 → AV2 → AV3 → AV4 → AV5 → AV1....
-Each time you press the PC button, the input toggles between analog and digital.
PC | PC mode | Displays the computer's |
| (analog/digital) | image. |
|
|
|
Notes:
-Be sure to select the display mode appropriate for the connected equipment to display its image clearly.
-When you turn on the TV, the initial display mode will be the mode being used when the TV was last turned off.
-You can also switch display modes using the INPUT button on the TV.
-In PC mode, when there is no input signal, "No Signal" is displayed.
English Español
E29