Sharp LL-T1803-H operation manual Adjusting the screen display With digital connection

Adjusting the screen display (With digital connection)

Adjustments can be made using On Screen Display	WHITE BALANCE Menu
(OSD) Menu provided.

English

On Screen Display for adjustment

If you are using Windows, open the Test Pattern on the accompanying Utility Disk. (p. 15)

If your system is not Windows, you can not use the Adjustment Pattern. Therefore display an image that makes the entire screen light and adjust it through checking visually its actual tone.

How to adjust

1.Press the MENU button.

The WHITE BALANCE Menu will be displayed.

At this point relevant menu options can be adjusted.

Each time the MENU button is pressed the next menu is selected. (WHITE BALANCE → MODE SELECT → OSD Menu disappears)

Notes:

-The OSD Menu automatically disappears several seconds after the last command.

Notes:

-On settings other than [STD] not all graduations can be displayed. To display all graduations, set to [STD].

-Use the buttons to select [COOL], [·], [STD], [·], [WARM] or [USER].

-Selecting USER will display the setting values for [R-CONTRAST], [G-CONTRAST] and [B-CONTRAST], in order to make fine adjustments.

-Use the SELECT button to select [R-CONTRAST], [G-CONTRAST] and [B-CONTRAST].

-To go to the next menu: MENU button COOL ... Color tone bluer than standard

•......... Color tone slightly bluer than standard STD ...... Color tone standard setting

•......... Color tone slightly redder than standard WARM .. Color tone redder than standard

USER

R-CONTRAST .... button for blue-green

button for red

G-CONTRAST .... button for purple

button for green B-CONTRAST .... button for yellow

button for blue

19