Print

Top page > Maintenance and precautions > About handling of your camcorder > On adjustment of the

touch panel

Operation Search

Before use

On adjustment of the touch panel

Getting started

Recording

The buttons on the touch panel may not work correctly. If this happens, follow the procedure below. It is

 

recommended that you connect your camcorder to the wall outlet (wall socket) using the supplied AC

Playback

Adaptor during the operation.

 

 

 

Saving images with an external

1.

[Setup]

[ General Settings]

[Calibration].

device

 

 

 

 

Customizing your camcorder

Troubleshooting

Maintenance and precautions

Contents list

2.Touch “” displayed on the screen with the corner of memory card or the like 3 times. Touch [Cancel] to cancel calibration.

Notes

If you did not press the right spot, try the calibration again.

Do not use a sharp-pointed object for calibration. Doing so may damage the LCD screen.

You cannot calibrate the LCD screen if it is rotated, or closed with the screen facing out.

Back to top

Copyright 2012 Sony Corporation

234

Page 234
Image 234
Sony XR260V, HDR-PJ600V, HDR-PJ580V, HDR-CX260V/B, HDR-CX580V, HDR-CX250 On adjustment of the touch panel, Contents list