While pressing on the tab (A), inset your fingernail into the slit to pull out the
battery case.
Place a new battery with the + side facing up.
Insert the battery case back into the Wireless Remote Commander until it
clicks.
WARNING
Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
When the lithium battery becomes weak, the operating distance of the Wireless Remote Commander
may shorten, or the Wireless Remote Commander may not function properly. In this case, replace
the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or
explosion.
LCD screen
Do not apply excessive pressure on the LCD screen, as it may cause uneven color and other
damage.
If your camcorder is used in a cold place, a residual image may appear on the LCD screen. This is
not a malfunction.
While using your camcorder, the back of the LCD screen may heat up. This is not a malfunction.
To clean the LCD screen
If fingerprints or dust make the LCD screen dirty, it is recommended that you use a soft cloth to clean
it.
To clean the projector lens (HDR-
PJ260/PJ260V/PJ580/PJ580V/PJ600/PJ600V)
Wipe the lens gently with a soft cloth such as a cleaning cloth or glass cleaning cloth.
Stubborn stains may be removed with a soft cloth such as a cleaning cloth or glass cleaning cloth
lightly dampened with water.
Never use a solvent such as alcohol, benzene or thinner; acid, alkaline or abrasive detergent; or a
chemical cleaning cloth, as they will damage the lens surface.
On handling the casing
If the casing is soiled, clean the camcorder body with a soft cloth lightly moistened with water, and
then wipe the casing with a dry soft cloth.
Avoid the following to avoid damage to the finish:
Using chemicals such as thinner, benzine, alcohol, chemical cloths, repellent, insecticide and
sunscreen
Handling the camcorder with above substances on your hands
Leaving the casing in contact with rubber or vinyl objects for a long period of time
To clean the flash (HDR-CX580V/PJ580/PJ580V/PJ600/PJ600V)
If fingerprints or dust make the surface of the flash dirty, it is recommended that you use a soft cloth
231