Sony HDR-CX250, XR260V Charging the battery using your computer, Battery pack Built-in USB Cable

"Handycam" User Guide

Operation Search

Before use

Getting started

Recording

Playback

Saving images with an external device

Customizing your camcorder

Troubleshooting

Maintenance and precautions

Contents list

Search Print

Top page > Getting started > Charging the battery pack > Charging the battery using your computer

Charging the battery using your computer

To charge the battery from a wall outlet (wall socket) using the Built-in USB Cable

Charging time

To remove the battery pack

1.Turn off your camcorder and connect the camcorder to a running computer using the Built-in USB

Cable ().

: To the wall outlet (wall socket)

The CHG (charge) lamp turns on.

The CHG (charge) lamp turns off when the battery pack is fully charged. Disconnect Built-in USB Cable from your computer.

To charge the battery from a wall outlet (wall socket) using the Built- in USB Cable

You can charge the battery by connecting the Built-in USB Cable to a wall outlet (wall socket) using an AC-UD10 USB charger/AC Adaptor (sold separately). You cannot use a Sony CP-AH2R, CP-AL, or AC- UP100 portable power supply device (sold separately) to charge the camcorder.

Charging time

Approximate time (min.) required when you fully charge a fully discharged battery pack.

Battery pack	Built-in USB Cable*
NP-FV50 (supplied)	280
NP-FV70	545
NP-FV100	1,000

The charging times shown in the table above are measured when charging the camcorder at a temperature of 25 °C (77 °F). It is recommended that you charge the battery in a temperature range of 10 °C to 30 °C (50 °F to 86 °F).

* The charging times are measured without using the USB Connection support cable.

To remove the battery pack

41