Digital Camera >>

Charging the Battery

Use the charger provided to recharge the battery. Make sure that the power of the camera is off and then insert the battery before starting.

1.

Place the battery on the charger.

 

2.

Connect the power adaptor to a wall

 

 

outlet.

1

 

Charging time differs depending on the

 

 

 

ambient temperature and the status of

2

battery.

3.The status light on the charger will be red when the battery is charging and green when the bateery is fully charged.

Always make sure that the digital still camera is off before removing the battery.

The battery may feel warm after it has been charged or immediately after being used. This is normal and not a malfunction.

When using the digital still camera in cold environments, keep the digital still camera and its battery warm by holding it inside your jacket or other warm protective environment.

The power of battery can not be charged through the camera.You need to remove the battery from the camera first and then follow the steps above to charge it in addition.

18

Page 20
Image 20
Sealife DC 600 manual Charging the Battery