Sealife DC 600 manual Shooting, Symptom Cause Solution

Digital Camera >>

Shooting

Symptom	Cause	Solution
	The battery is running low.	Recharge or use the AC
		power adapter/charger.
	The power is not on.	Turn the power on.
	The camera is not in	Slide the mode switch to
	shooting mode.	shooting mode.
	The shutter button is not	Press the shutter button all
Even if I press the	pressed all the way.	the way.
shutter button, the
	The memory card does not	Load a new card, or delete
camera does not	have any free space.	unwanted files.
shoot.
	End of memory card life.	Load a new memory card.
	The flash is recharging.	Wait until the status LED off.
	The memory card is	Format the memory card in
		this camera before its first
	unrecognized by the camera.
		use or when it was used
		other than this camera.
	The auto power off function	Turn the power on again.
	is activated.
	The memory card is write-	Remove the
	protected.	write-protection.
Images do not appear	The power is not on.	Turn the power on.
on the LCD monitor.		Adjust the brightness of
	The LCD monitor is dark.	the LCD monitor in the
		photography or playback
		menu.
Although it is set to	The lens is dirty.	Wipe clean with a soft, dry
		cloth or lens paper.
Auto Focus, it does
not focus.	The distance to the subject	Get your subject within the
	is smaller than the effective	effective focus range.
	range.	Switch camera to infinity
	There is insufficient light or	[ ] focus. All subjects
	contrast for the camera to	beyond 50cm (25ft) will be
	focus on the subject.	in focus.

76