Sealife DC 600 manual Is blue and lacks Yellow colors Color

Symptom	Cause	Solution
The flash does not	The flash is set to off.	Set the flash to something
fire.		other than flash off mode.
	The flash is not ready or	It takes approximately 4
	charged.	seconds for the camera to
		recharge the flash. Wait for
		LED indicator light to be
		solid green.
	The flash is set to Auto and	Consider setting the flash to
	there is enough surrounding	ON to force fire the flash in
	light.	bright light.
Even though the flash	The distance to the subject	Get closer to your subject
fired, the image is	is greater than flash	and shoot.
dark.	effective range.
	The image was captured	Set the flash to something
	in a dark place while set to	other than flash off mode.
The image is too dark.	flash off.
		Set the exposure
	It is under-exposed.	compensation to a larger
		value.
		in ext. Flash mode, set
		camera to far Flash to make
		images brighter.
The image is too	It is over-exposed.	Set the exposure
bright.		compensation to a smaller
		value.
		In Ext. Flash mode, set
		camera to macro flash to
		make images darker.
The land image lacks	The image was captured in	Manually set select white
	conditions that are hard
natural color.		balance.
	for Auto White Balance to
(Land only)
	adjust to.
The underwater image	Water filters out red and	Set camera to Sea mode and
		select appropriate white balance.
is blue and lacks	yellow colors.
color.		Use External Flash accessory to
		restore lost colors.

User’s Manual >>

77