Sealife DC 600 manual No Power Battery power low Recharge battery

Problem	Cause	Solution
No Power	Battery power low	Recharge battery
	Power save function activated.	Turn camera back on.
	Contact service center.	Camera damaged
Camera gets hot	Constant use of camera.	This is normal.
No PC connection	USB cable not connected
	to USB port.	Inspect connection ports.
	Camera driver not installed	Install camera driver CD
		for Windows 98 only.
No Video Connection	Improper connection to TV	Connect video cable to video
		IN jack of TV or VCR and
		change TV/VCR to video in
		channel
Poor Video connection	Video cable not fully inserted	Make sure video cable is
	into camera or TV	completely inserted into
		video jack of camera docking
		station. Also check that
		connection to TV/VCR is
		correct.
“Memory full” message	Memory storage is full.	Delete images or download
		to PC. Insert empty memory
		card.
Pictures out of focus	Dirty lens.	Clean lens with clean cotton
		cloth.
	Fogged housing lens.	Insert camera in dry,
		air-conditioned room. Use
		anti-fog desiccant inside
		housing. Do not let water
		drops get inside housing.
	Low water visibility	Shooting distance not to
		exceed 1/10 of visibility.
	Auto focus not set	Camera did not establish
		correct focus setting. Select
		landscape (infinity) focus
Grainy picture	Dark light conditions.	Move closer to subject
		(2’ to 6’). Use SeaLife
		accessory Flash to illuminate
		subject and improve color
		and brightness..

User’s Manual >>

99