GETTING STARTED
Attaching the Camera Strap
Attach the camera strap as shown in the illustration. Important: camera strap must be removed when using camera inside waterproof housing.
Inserting and Removing the Battery
Charge the battery for 8 hours before using the camera. First allow battery fully discharge through normal use before recharging. Make sure that the power of the camera is off before inserting or removing the battery.
Inserting the Battery
1.Open the battery/SD card cover.
2.Insert the battery in the correct orientation shown.
Tilt the battery lock lever towards the SD card slot and orient the battery so that the square edge is facing the top of the camera. Battery inserts smoothly. Do not use force.
3.Close the battery/SD card cover.
Removing the Battery
Open the battery/SD card cover and then release the battery lock lever. When the battery has come out a little, slowly pull it out the rest of the way.
User’s Manual >>
17
