"Handycam" User Guide
Operation Search
Before use
Getting started
Recording
Playback
Saving images with an external device
Customizing your camcorder Troubleshooting Maintenance and precautions
Contents list
Search | |
|
|
Top page > Troubleshooting > Troubleshooting > Recording
Recording
Refer also to “Memory card”.
Pressing START/STOP or PHOTO does not record images.
The playback screen is displayed. Press MODE to turn on the 
(Movie) or 
(Photo) lamp. [Details] [Details]
Your camcorder is recording the image you have just shot on the recording media. You cannot make new recording during this period.
The recording media is full. Delete unnecessary images. [Details]
Total number of movie scenes or photos exceeds the recordable capacity of your camcorder. Delete unnecessary images. [Details] [Details]
The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place.
The temperature of your camcorder is extremely low. Turn off your camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on the camcorder.
Photos cannot be recorded.
You cannot record photos together with: [Smth Slw REC]
[Golf Shot]
[
Fader]
The camcorder cannot shoot photos while it is in the movie recording mode, depending on the [
REC Mode] or [
Frame Rate] selected.
The access lamp remains lit or flashing even if recording was stopped.
Your camcorder is recording the scene you have just shot on the memory card.
The imaging field looks different.
The imaging field may look different depending on the condition of your camcorder. This is not a malfunction.
The flash does not work. (HDR-CX580V/PJ580/PJ580V/PJ600/PJ600V)
You cannot record with the
the 
(Movie) lamp is on
[Conversion Lens] is set to other than [Off]
Even if auto flash or 
(Auto redeye reduction) is selected, you cannot use the flash with: [Spot Meter/Fcs]
[Spot Meter]
[Manual] in [Exposure]
202
