Tips and safety precautions
-Under certain display conditions, minute specks or spots may be noticeable. This is common for liquid crystal monitors and is not a malfunction.
-The LCD panel has been manufactured using highly elaborate technology. Properly working pixels comprise 99.99% of total pixels. However, please understand that 0.01% or less of pixels may be missing or be brighter than usual.
-Do not leave the screen displaying idly for long periods of time, as this could cause afterimage to remain.
-If the brightness is adjusted to the minimum set- ting it may be difficult to see the screen.
-The quality of the computer signal may influence the quality of the display. We recommend using a computer able to emit high quality video signals.
-Never rub or tap the monitor with hard objects.
-Please understand that Sharp Corporation bears no responsibility for errors made during use by the customer or a third party, nor for any other malfunctions or damage to this product arising during use, except where indemnity liability is recognized under law.
-This monitor and its accessories may be up- graded without advance notice.
Location
-Do not use the monitor where ventilation is poor, where there is a lot of dust, where humidity is high, or where the monitor may come into contact with oil or steam, as this could lead to fire.
-Ensure that the monitor does not come into contact with water or other fluids. Ensure that no objects such as paper clips or pins enter the monitor as this could lead to fire or electric shock.
-Do not place the monitor on top of unstable objects or in unsafe places. Do not allow the monitor to come into contact with strong shocks or vibrations. Causing the monitor to fall or topple over may damage it.
-Do not use in places where the monitor will be subject to direct sunlight, near heating equipment or anywhere else where there is likelihood of high temperature, as this may lead to generation of excessive heat and outbreak of fire
The Power Cord
-Do not damage the power cord nor place heavy objects on it, stretch it or overly bend it. Also, do not add extension cords. Damage to the cord may result in fire or electric shock.
-Use only the AC adapter supplied with the monitor. Using an AC adapter other than that supplied may lead to fire.
-Insert the power plug directly into the AC outlet. Adding an extension cord may lead to fire as a result of overheating
Monitor and accessory checklist
-Please check that the following items are included in the package.
-LCD monitor (1)
-AC adapter (1)
-USB cable (1)
-Utility Disk for Windows and Macintosh (1)
-Operation manual (1)
Notes:
-You are advised to retain the carton in case the monitor needs to be transported.
-Authorship rights to the Monitor Settings Adjustment Disk's program are held by Sharp Corporation. Do not reproduce it without permission.
Manual Scope
-In this booklet, Microsoft Windows 2000 will be referred to as [Windows2000], Microsoft Windows Millenium as [WindowsMe], Microsoft Windows 98 as [Windows98], Microsoft Windows 95 as [Windows95], and Microsoft Windows Version 3.1 as [Windows3.1]. When there is no need to distinguish between programs, the term [Windows] will be used.
-Microsoft and Windows are registered trademarks of Microsoft Corporation.
-Macintosh is a registered trademark of Apple Computer, Inc.
7
