To erase tracks

To erase tracks one at a time:

1 Start playing the track you want to erase, and press the 06 button.

The unit will enter the pause mode.

2 Press the EDIT button to select “ERASE”.

12

To erase all of the tracks at once:

1 Whilst in the stop mode, press the EDIT button to select “ALL ERASE”.

“ALL ERASE” can also be selected by holding down the EDIT button for at least 2 seconds.

2 Press the ENTER/SYNC button.

To cancel the operation, press the /:OFF button.

12

3 Press the ENTER/SYNC button again.

All of the track numbers, track names, and disc names will be erased.

Number of the paused track

3 Press the ENTER/SYNC button.

To cancel the operation, press the

/:OFF button.

4 Press the ENTER/SYNC button again.

The track will be erased.

34

5 To erase other tracks, repeat steps 1 -4.

Notes:

Once a track has been erased, it cannot be recovered. Double-check the track number before erasing it.

When a track is erased, the numbers as- signed to the tracks following the erased track will be automatically decreased by one.

When a track is erased, the track name will be erased at the same time.

19

* MD-MT16H FOR UK(01-21)

20

99.4.2, 0:57 PM

Page 20
Image 20
Sharp MD-MT16H operation manual To erase tracks To erase tracks one at a time, To erase all of the tracks at once