Error Messages, Blank Disc | Sharp MD-MT16H instruction

ERROR MESSAGES

	Error messages	Meaning	Remedy
		● The battery run down.	● Charge the rechargeable battery or
	BATT EMPTY		replace the alkaline batteries (or use
			the AC adaptor for power).
	BLANK DISC	● Nothing is recorded.	● Replace the disc with a recorded disc.
	Can’t COPY	● No copy can be made because of	● Record using the analogue cable.
	Can’t COPY	the SCMS copyright system.
		the SCMS copyright system.
	Can’t EDIT	● A track cannot be edited.	● Change the stop position of the track
	Can’t EDIT		and then try editing it.
			and then try editing it.
	Can’t REC	● Recording cannot be performed cor-	● Re-record or replace it with another
	Can’t REC	rectly due to vibration or shock in the unit.	recordable disc.
		rectly due to vibration or shock in the unit.	recordable disc.
	Can’t WRITE	● Editing is impossible.	● Check the number of tracks.
		● The disc is scratched.	● If the sound you hear is not right, try
	DEFECT		recording again.
	DEFECT		● Replace the disc with another re-
			● Replace the disc with another re-
			cordable disc.
	Din UNLOCK	● Poor connection of the digital cable.	● Connect the digital cable securely.
	DISC FULL	● The disc is out of recording space.	● Replace it with another recordable
	DISC FULL		disc.
			disc.
	HOLD	● The unit is in the hold mode.	● Return the HOLD switch to its origi-
	HOLD		nal position.
			nal position.
	LOCKED	● The OPEN lever was moved during	● Turn off the power and remove the
	LOCK ERROR	recording or editing.	MiniDisc.
	NO DISC	● A disc has not been loaded.	● Load a disc.
	PB DISC	● You tried to record on a playback	● Replace it with a recordable disc.
	PB DISC	only disc.
		only disc.
	POWER ?	● Improper power is being supplied.	● Use one of the specified power
	POWER ?		sources.
			sources.
	PROTECTED	● The MD is write protected.	● Move the write protection knob back
	PROTECTED		to its original position.
			to its original position.
	READ ERROR	● The disc is damaged.	● Reload the disc or replace it.
			● Replace it with another recorded disc.
		● Since a track number is currently	● Wait for a while and try the opera-
	SORRY	being located or written to, the unit	tion again.
		cannot accept your command.
	SYSTEM ERR	● You have come to the conclusion	● To have it repaired, go to the distribu-
		that the unit is out of order.	tor where you purchased the unit.
	TEMP OVER	● The temperature is too high.	● Turn off the power, and wait for a
			while.
	TOC ERROR	● A large portion of the disc has been	● Replace it with another recorded
	TOC ERROR	damaged.	disc.
		damaged.	disc.
		● There is no space left for recording	● Replace it with another recordable
	TOC FULL	character information (track names,	disc.
		disc names, etc.).
	Tr. Protect	● The track has been protected from	● Edit the track with the device on
	Tr. Protect	being erased.	which it was recorded.
		being erased.	which it was recorded.
		● A large portion of the disc has been	● Replace it with another recorded
	U TOC ERROR	damaged.	disc.
	U TOC ERROR	● There is an error in the recorded sig-	● Erase all of the signal errors, and
		nal.	then try recording again.

		● A disc which contains data other than	● A disc which contains non-music
	? DISC	music was played.	data cannot be played.
	? DISC	● There is an error in the signal from	● Replace it with another recorded
		● There is an error in the signal from	● Replace it with another recorded
		the disc.	disc.

40

* MD-MT16H FOR UK(22-42)

41

99.4.2, 0:55 PM

Image 41

Sharp MD-MT16H operation manual Error Messages, Blank Disc

Contents

MD-MT16E Special Notes Service Information MD-MT16H for UK01-21 99.4.2, 056 PM Accessories ContentsOptional Accessories Introduction Volume setting PrecautionsConcern for others when listen- ing to MiniDiscs Precautions 18 19 Names of Controls and Indicators Precautions for alkaline battery use Power SourceAlkaline batteries power Insert securely 50/60 Hz All the way Rechargeable battery powerTo the DC in 5V socket Do not drop or subject the battery to shock About the rechargeable batteryAC power Type of recording Before RecordingAnalogue recording Digital recording Recordable MiniDisc Types of discsTo prevent recorded discs from being erased accidentally Playback-only MiniDisc Recording from CDs or MDs Synchro recording Recording Using the Analogue CableTo interrupt recording To stop recording Recording from a tuner or a CD Manual recording To turn off the powerTo remove the MiniDisc There are cases where digital recording may be impossible Recording Using the Optical Digital CableStart recording Synchro recording Manual recording Recording from the microphone Mic synchro recording Recording from the Microphone Recording from the microphone Mic manual recording To interrupt a synchro recordingTo interrupt a recording Press the /OFF button Convenient Recording Function Example when the setting is for 5 minutesAbout the timed auto mark Timed auto mark will be created every 5 minutes To start recording from the middle of an existing track Recording tracks as a single trackMaking a track number automati- cally 1Press the Edit button whilst the recording is paused To create your own track numbers whilst recording Double time recording in monaural modeTo check the remaining disc time To erase all of the tracks at once To erase tracks To erase tracks one at a time About Track Numbers When recording from digital inputs CDs/MiniDiscs only About TOC recording When is the TOC recorded?About the TOC Playing a Minidisc Playback does not start when a MiniDisc is insertedEarphones Track number Track name Resume auto play function To interrupt playback To remove the MiniDiscTo stop playback Convenient Playback Functions To interrupt fast playback Random play or repeat playTo play at double speed Mono recording only To display the playing time of an indi- vidual track To check the elapsed time and remaining time of the track What the editing function can do EditingDisc/Track name Name/stamp Example MoveDivide Combine When one or both tracks to be combined have a nameDisc name Following cases, tracks may not be combined Track name Type of characters Characters symbolsLights up To erase a character To delete characters To change disc names or track namesTo add characters Master MiniDisc Recordable MD-MT16H for UK22-42 99.4.2, 055 PM Listening through a car stereo Using with Other Equipment How to read the battery indicator Checking the remaining amount of battery levelConvenient Operation of the Unit To prevent the unit from being operated by mistake To eliminate the confirmation sound To cancel the auto-play functionWhilst in the stop mode Hold down the Mode button until SET UP appears To cancel the auto power save function Troubleshooting What is a MINIDISC? If trouble occurs Minidisc System Limitations Blank Disc Error Messages Specifications MaintenanceCleaning General MiniDisc Recorder A9904.TO Terms of Guarantee