Power Source, Alkaline batteries power | Sharp MD-MT16H specification

POWER SOURCE

You can power this unit with commercially available alkaline batteries (LR6, “AA” size). You can also power this unit with a rechargeable battery (AD-T20BT), AC adaptor (AD- T20APE) or car adaptor (AD-CA20X) which are available separately. (See page 3.)

1

2

3

Caution:

●If the unit is not used for a long period of time, remove the battery. (Even if the power is turned off, the battery will drain slowly but continuously.)

●Do not use any car adaptor except for the separately available AD-CA20X.

●For information about the battery life, see the battery item in the SPECIFICATIONS on page 41.

●This unit should only be used within the range of 0°C - 40°C (32°F - 104°F).

●Do not use alkaline batteries other than those specified (LR6, “AA” size).

■Alkaline batteries power

●Use two commercially available alkaline batteries (LR6, “AA” size).

1 Open the battery cover.

●Slide the battery cover as far as it will go to the outside and then lift to open it.

If the battery cover is lifted without being slid all the way out, it may break.

2 Insert two alkaline batteries according to the polarity marked on the bottom of the unit.

●Installing the batteries incorrectly may cause the unit to malfunction.

3 Close the battery cover.

Precautions for alkaline battery use:

●Replace all old batteries with new ones at the same time.

●Do not mix old and new batteries.

●Remove the batteries if they are weak or if the unit is not in use for long periods to prevent potential damage due to battery leakage.

Caution:

Do not use nickel-cadmium battery, etc. instead of alkaline batteries.

6

* MD-MT16H FOR UK(01-21)

7

99.4.2, 0:56 PM

Image 7

Sharp MD-MT16H operation manual Power Source, Alkaline batteries power, Precautions for alkaline battery use

Contents

MD-MT16E Special Notes Service Information MD-MT16H for UK01-21 99.4.2, 056 PM Introduction ContentsAccessories Optional Accessories Precautions PrecautionsVolume setting Concern for others when listen- ing to MiniDiscs 18 19 Names of Controls and Indicators Alkaline batteries power Power SourcePrecautions for alkaline battery use To the DC in 5V socket Rechargeable battery powerInsert securely 50/60 Hz All the way AC power About the rechargeable batteryDo not drop or subject the battery to shock Digital recording Before RecordingType of recording Analogue recording Playback-only MiniDisc Types of discsRecordable MiniDisc To prevent recorded discs from being erased accidentally To stop recording Recording Using the Analogue CableRecording from CDs or MDs Synchro recording To interrupt recording To remove the MiniDisc To turn off the powerRecording from a tuner or a CD Manual recording Manual recording Recording Using the Optical Digital CableThere are cases where digital recording may be impossible Start recording Synchro recording Recording from the microphone Mic synchro recording Recording from the Microphone Press the /OFF button To interrupt a synchro recordingRecording from the microphone Mic manual recording To interrupt a recording Timed auto mark will be created every 5 minutes Example when the setting is for 5 minutesConvenient Recording Function About the timed auto mark 1Press the Edit button whilst the recording is paused Recording tracks as a single trackTo start recording from the middle of an existing track Making a track number automati- cally To check the remaining disc time Double time recording in monaural modeTo create your own track numbers whilst recording To erase all of the tracks at once To erase tracks To erase tracks one at a time About Track Numbers When recording from digital inputs CDs/MiniDiscs only About the TOC When is the TOC recorded?About TOC recording Track number Track name Playback does not start when a MiniDisc is insertedPlaying a Minidisc Earphones To stop playback To interrupt playback To remove the MiniDiscResume auto play function Convenient Playback Functions To play at double speed Mono recording only Random play or repeat playTo interrupt fast playback To display the playing time of an indi- vidual track To check the elapsed time and remaining time of the track Name/stamp EditingWhat the editing function can do Disc/Track name Divide MoveExample Following cases, tracks may not be combined When one or both tracks to be combined have a nameCombine Disc name To erase a character Type of characters Characters symbolsTrack name Lights up Master MiniDisc Recordable To change disc names or track namesTo delete characters To add characters MD-MT16H for UK22-42 99.4.2, 055 PM Listening through a car stereo Using with Other Equipment To prevent the unit from being operated by mistake Checking the remaining amount of battery levelHow to read the battery indicator Convenient Operation of the Unit Whilst in the stop mode To cancel the auto-play functionTo eliminate the confirmation sound Hold down the Mode button until SET UP appears To cancel the auto power save function Troubleshooting What is a MINIDISC? If trouble occurs Minidisc System Limitations Blank Disc Error Messages General MaintenanceSpecifications Cleaning MiniDisc Recorder A9904.TO Terms of Guarantee