Sharp MX-2700N SELECTING A SPECIAL MODE, (2), (1), (3), (4)OK

SELECTING A SPECIAL MODE

The procedure for selecting settings for a special mode is explained below. The settings that must be selected vary for each special mode, however, the general procedure is the same. The procedure for selecting settings for "Adding margins (Margin Shift)" is explained below as an example.

The side to be scanned must be face up!

1

Ready to scan for copy.

Full Color

Color Mode

0

Original 81/2x11 2-Sided Copy

Place the original.

When using the document glass, place the original with the side to be scanned face down.

2

Select the desired special mode (example: margin shift) settings in the

Job Detail

Settings

Auto

Plain

81/2x11

1.81/2x11

Output

Special Modes

touch panel.

(1) Touch the [Special Modes] key.

Exposure

100%

Copy Ratio

Special Modes

Margin Shift

(2)

Pamphlet Copy

Special Modes

3.			81/2x14	(1)
2.			8 2x11R			File
			1/
		4.	11x17		Quick File
						OK
							1/4
	Erase			Dual Page
				Copy
		Job		Tandem
	Build			Copy

OK

(2)	Touch the [Margin Shift] key.
	Settings to shift the left margin by 3/4" will be
	selected.
(3)	Select 3/4" for the front side and 3/4" for
	the reverse side using the	keys.

									(4)OK
Margin Shift						Cancel
			Side 1					Side 2
Right	Left	Down
				3/4	inch(0~1)				3/4	inch(0~1)
		(3)

(4) Touch the [OK] key.

The margin shift position is initially set to

"Right".

To change the position to "Left" or "Down",

touch the corresponding key.

	3
	Set the number of copies and then press
	the [COLOR START] key or the [BLACK
or	& WHITE START] key.
		Correct sets	Cancel scanning	Cancel copying

34