Sharp MX-7001N Toner does not adhere, Well or creases appear, Paper, Print quality is poor

Models: MX-7001N MX-6201N MX-5500N MX-7000N MX-6200N

1 76
Download 76 pages 42.81 Kb
Page 68
Image 68

Problem

 

Point to check

Solution

 

 

 

 

Smudges appear on

 

Are you printing on pre-punched paper?

If the printed image overlaps the punch holes, smudges

printed output.

 

 

may appear on the reverse side of the paper following

 

 

 

one-sided printing, or on both sides following two-sided

 

 

 

printing. Take care that the image does not overlap the

 

 

 

punch holes.

 

 

 

 

 

 

Does a message appear indicating the

Contact your dealer or nearest authorised service

 

 

need for maintenance?

representative as soon as possible.

Toner does not adhere

 

 

 

 

Are you using paper that is not within

Use SHARP-recommended paper. Using paper that is

well or creases appear

 

the specifications?

for other models or special paper that is not supported

in the paper.

 

 

may result in misfeeds, creases, or smudges.

 

 

 

"SUPPLIES" in this operation manual

 

 

 

 

 

 

Did you set the correct paper type?

Set the correct paper type in the tray settings. Make

 

 

 

sure that the following has not occurred:

 

 

 

• Heavy paper is being used, but a paper type other

 

 

 

than heavy paper is selected in the tray settings. (The

 

 

 

image may disappear if rubbed.)

 

 

 

• Paper other than heavy paper is being used, but

 

 

 

heavy paper is selected in the tray settings. (This may

 

 

 

cause creases and misfeeds.)

 

 

 

System Settings > "Paper Tray Settings" > "Tray

 

 

 

Settings"

 

 

 

 

 

 

Is the paper loaded so that printing

If printing takes place on the wrong side of label sheets

 

 

takes place on the reverse side?

or transparency film, the toner may not adhere well and

 

 

 

a clear image may not be obtained.

Print quality is poor.

 

 

 

 

Is "Toner Save Mode" enabled?

When "Toner Save Mode" is enabled, printing takes

 

 

 

place using less toner and thus the print result is lighter.

 

 

 

Check with your administrator.

Part of the image is

 

 

 

 

Has the correct paper size been set?

If you are using a special size, be sure to specify the

cut off.

 

 

paper size.

 

 

 

If the size of paper loaded in a tray was changed, be

 

 

 

sure to check the paper size setting.

 

 

 

System Settings > "Paper Tray Settings" > "Tray

 

 

 

Settings"

 

 

 

 

 

 

Was the original placed in the correct

If you are using the document glass, be sure to place

 

 

position?

the original in the far left corner of the document glass.

 

 

 

Illustration of the machine (J) (page 70)

Printing takes place

 

 

 

 

Is the paper loaded with the print side

• Trays 1 to 4:

on the wrong side of

 

facing in the correct direction?

Load the paper with the front side facing up*.

the paper.

 

 

• Bypass tray and tray 5:

 

 

 

Load the paper with the front side facing down*.

 

 

 

* When the paper type is "Pre-Printed" or "Letter Head",

 

 

 

load the paper in the opposite way. (Except when

 

 

 

"Disabling of Duplex" is enabled in the system settings

 

 

 

(administrator). For the current setting, check with your

 

 

 

administrator.)

 

 

 

 

64

Page 68
Image 68
Sharp MX-7001N, MX-6200N Toner does not adhere, Well or creases appear, Paper, Print quality is poor, Printing takes place

MX-7001N, MX-6201N, MX-5500N, MX-7000N, MX-6200N specifications

The Sharp MX-6200N, MX-7000N, and MX-5500N are advanced multifunctional printers designed for medium to large business environments. These models are known for their high-performance capabilities, robust features, and cutting-edge technology, making them ideal for streamlining office tasks and enhancing productivity.

The Sharp MX-6200N offers impressive print speeds of up to 62 pages per minute, ensuring rapid document production without compromising quality. It boasts a high-resolution output of 1200 x 1200 dpi, delivering sharp and vibrant prints. The intuitive 10.1-inch touchscreen interface provides easy navigation and streamlined access to various functions, including printing, scanning, copying, and faxing.

The MX-7000N takes performance a step further with print speeds peaking at 75 pages per minute. This model features advanced scanning capabilities, enabling users to digitize documents quickly with a dual scanning option that supports both one-sided and two-sided originals. Enhanced security features, such as data encryption and user authentication, ensure that sensitive information remains protected.

Meanwhile, the MX-5500N is positioned as a versatile solution with print speeds of up to 55 pages per minute. It features a large-capacity paper tray that can hold up to 3,300 sheets, significantly reducing the frequency of paper replenishment. This model also incorporates customizable workflows, which allow users to set predefined tasks for routine printing and scanning jobs, increasing efficiency.

All three models utilize Sharp’s advanced imaging technology, combined with a real-time image processing engine, for consistent, high-quality outputs across all document types. They support various media sizes and types, from standard letter and legal paper to envelopes and labels, providing flexibility in printing.

Networking capabilities are integral to each model, featuring both wired and wireless connectivity options for seamless integration into existing office infrastructure. Additionally, they are compatible with mobile printing solutions, enabling users to print directly from their smartphones or tablets.

Overall, the Sharp MX-6200N, MX-7000N, and MX-5500N multifunction printers are powerful tools designed to meet the diverse needs of modern businesses. Whether for high-volume printing, secure document management, or versatile scanning solutions, these models stand out for their reliability, efficiency, and user-friendly features, driving productivity in any work environment.