Sharp PG-M15X appendix Selecting the Picture Display Mode, Output screen image Input Signal

Selecting the Picture Display Mode

Remote control	This function allows you to modify or customize the
	picture display mode to enhance the input image.
	Depending on the input signal, you can choose the
	picture display mode preferred.

1 Press RESIZE on the remote control. Each time

1 RESIZE is pressed, the picture mode changes as shown below.

FeaturesUseful

COMPUTER	PG-M15X
EXAMPLE			NORMAL	DOT BY DOT
	4:3 aspect ratio	SVGA (800 × 600)	1024 × 768	800 × 600
		XGA (1024 × 768)	1024 × 768	–
	Other aspect ratios	SXGA (1280 × 1024)	1024 × 768	1280 ×1024
	PG-M15S
			NORMAL	DOT BY DOT
	4:3 aspect ratio	SVGA (800 × 600)	800 × 600	–
		XGA (1024 × 768)	800 × 600	1024 × 768
	Other aspect ratios	SXGA (1280 × 1024)	800 × 600	1280 × 1024
		Output screen image
	Input Signal	NORMAL	DOT BY DOT
		Projects a full screen image.	Projects the original resolution
			signal of the image.
	VGA,
	SVGA
	(PG-M15X)			RESIZE
	VGA	NORMAL
		RESIZE		DOT BY DOT
	(PG-M15S)
	XGA
	(PG-M15X)
	SVGA	RESIZE
	(PG-M15S)	NORMAL

XGA

(PG-M15S)

RESIZE	RESIZE
NORMAL	DOT BY DOT

SXGA

(PG-M15X)

SXGA	RESIZE	RESIZE
	NORMAL	DOT BY DOT

(PG-M15S)

PG-M15X

•When inputting an XGA (1024×768) signal, the image display is set in NORMAL mode, and

DOT BY DOT selection is not available.

PG-M15S

•When inputting an SVGA (800×600) signal, the image display is set in NORMAL mode, and DOT BY DOT selection is not available.

36