Checking the Input Signal (INPUT 1 (DVI) mode or (RGB) mode only)
Projector
1, 4 2, 3 2, 3
Remote control
(GUI) On-screen Display
Picture | Clock | 0 | |
Phase | 0 | ||
Fine Sync | |||
0 | |||
Options | 0 |
Language | Signal Info | Resolution | 1024 × 768 |
| Hor Freq | 46.3 kHz | |
PRJ Mode |
| ||
| Vert Freq | 60 Hz |
This function allows you to check the current input signal information.
1Press MENU.
2Press ∂/ƒ to select “Fine Sync”, and then press
ENTER.
3Press ∂/ƒ to select “Signal Info”, and then press
ENTER.
4To exit from the GUI, press MENU.
END |
| SELECT | BACK | ENTER |
|
Checking the Lamp Usage Time
Projector
1 | 2 | 2 |
Remote control
(GUI) On-screen Display
Picture | Lamp Timer | 100 |
| ||||
Keystone | 0 |
|
|
|
| ||
Fine Sync |
|
|
|
| |||
AV Mute Disp. | ON | ||||||
Options | OSD Display | ON | |||||
Language | Auto Power Off | ON | |||||
Auto Source | ON | ||||||
PRJ Mode | |||||||
Background | Blue | ||||||
This function allows you to check the accumulated lamp usage time.
1Press MENU.
2Press ∂/ƒ to select “Options”, and then press ENTER. The current lamp usage time will be displayed.
•It is recommended that the lamp be replaced after approximately 1,400 hours of usage. See pages 47 and 48 for lamp replacement.
Useful Features
END |
| SELECT | BACK | ENTER |
|
39
