Sharp PG-M15X appendix DTV decoder DVD player

Connecting the Projector

Connecting a video source (DTV* decoder or DVD player) using the DVI-DIGITAL/ANALOG INPUT 1 port

Setup Connections&

DVI-Analog to VGA adaptor

AV audio cable

1Connect one end of the supplied DVI-Analog to VGA adaptor to the DVI-DIGITAL/ANALOG INPUT 1 port on

the projector.

2Connect the other end of the DVI-Analog to VGA adaptor to the video source using the HD-15/RCA cable (sold

separately).

3 To use the built-in audio system, connect one end of the supplied AV audio cable to the AUDIO INPUT terminal on the projector.

4Connect the other end to the audio output terminal on the video source.

Projecting the image

•When connecting the DTV decoder or DVD player to the DVI-DIGITAL/ ANALOG INPUT 1 port on the projector, press INPUT on the remote control or the projector and select the input signal type to INPUT 1 COMPONENT.

•The image quality may become lower depending on DTV signal compatibility.

•The projector can only accept 480i signals.

Projector

AV audio cable

3

1DVI-Analog to VGA adaptor

HD-15/RCA cable (sold separately)

Model name AN-C3CP

4

DTV decoder

or

DVD player

2

*DTV is the umbrella term used to describe the new digital television system in the United States.

16