
Projecting a Reversed/Inverted Image
Projection from behind the screen
■Place a translucent screen between the projector and the audience.
■Reverse the image by setting “Rear” in “PRJ Mode”. See page 60 for use of this function.
Projection using a mirror
■Place a mirror (normal flat type) in front of the lens.
■Reverse the image by setting “Rear” in “PRJ Mode”, when the mirror is placed on the audience side. See page 60 for use of this function.
Info
•When using a mirror, be sure to carefully position both the pro- jector and the mirror so the light does not shine into the eyes of the audience.
Ceiling-mount setup
■It is recommended that you use the optional Sharp
Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended
■Be sure to adjust the position of the pro- jector to match the distance (H) from the lens center position (see page 18) to the lower edge of the image, when
mounting the projector on the ceiling.
■Invert the image by
setting “Ceiling + Front” in “PRJ Mode”.
When using the default setting.
The image is reversed.
When using the default setting.
The image is reversed.
When using the default setting.
The image is inverted.
Setup and Connections
-19