Correcting Trapezoidal Distortion (Keystone Correction)
Correcting Trapezoidal Distortion
This function allows for Keystone
Note
•Keystone Correction is the correction for trapezoidal distortion that occurs when the image is positioned away from the center axis of the screen.
•The trapezoidal distortion can be corrected up to an angle of approximately ± 35 de- grees.
1 Press | . |
|
• Pressing | again while the BOR- | |
DER, STRETCH or SMART STRETCH | ||
screen is displayed will start the Digital | ||
Shift function. See page 33. |
| |
2 Press | or | to ad- |
just the Keystone correction.
•If you want to make more detailed cor-
rections, press 
to display the test
pattern, and then press 
or
to make the adjustments.
Note
•Since the trapezoidal distortion of
the image can be corrected up to an angle of approximately ± 35 de- grees, the actual screen can be di- agonally set up to that angle as well. (For more details on the settings, see page 8.)
•Press 
to cancel Keystone Cor- rection.
3 Press 
.
Note
•You can use the same settings used in NORMAL mode 4:3 for 16:9.
•Straight lines or the edges of images may appear jagged while adjusting the image.
LENS button
ENTER
button
buttons UNDO button
Normal screen |
| Keystone Correction screen | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compresses upper side.
Compresses lower side. 
Test pattern
-32
