Sharp PG-M20S operation manual Appendix, Specifications are subject to change without notice

Specifications

Product type	Digital Multimedia Projector
Model	PG-M20S
Video system	NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
	DTV480I/DTV480P/DTV720P/DTV1080I
Display method	Single Chip Digital Micromirror Device™ (DMD™) by Texas Instruments
DMD panel	Panel size: 0.55" (14 mm), 1 chip SVGA DMD
	No. of dots: 480,000 dots (800 [H] ⋅ 600 [V])
Lens	1–1.2 ⋅	zoom lens, F1.75–2.04, f = 28.0–33.5 mm
Projection lamp	High Intensity Discharge Lamp (HID Lamp), DC 210 W
Component input signal	29-pin connector
(INPUT1)	DVI input signal: Digital 250–1,000 mV 50 Ω
		Analog 0.7 Vp-p 75 Ω
	Y: 1.0 Vp-p, sync negative, 75 Ω terminated
	PB: 0.7 Vp-p, 75 Ω		terminated
	PR: 0.7 Vp-p, 75 Ω		terminated
Horizontal resolution	500 TV lines (S-VIDEO)
Computer RGB input signal	29-pin connector
(INPUT 1)	RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
	HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
	VERTICAL SYNC. SIGNAL: Same as above
S-video input signal	4-pin Mini DIN connector
(INPUT 2)	Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
	C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
Video input signal	RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
(INPUT 3)	terminated
Pixel clock	12–120 MHz
Vertical frequency	43–160 Hz*
Horizontal frequency	15–102 kHz
Audio input signal	ø3.5 mm MINIJACK: AUDIO, 0.5 Vrms, more than 47 kΩ (stereo)
Audio output	2.0 W (monaural)
Speaker system	4 cm ⋅	3 cm
Rated voltage	AC 100–240 V
Input current	3.2 A
Rated frequency	50/60 Hz
Power consumption	290 W
Heat dissipation	1,090 BTU/hour
Operating temperature	41° F to 95° F (+5° C to +35° C)
Storage temperature	–4°F to 140° F (–20°C to +60° C)
Cabinet	Plastic
I/R carrier frequency	38 kHz
Dimensions (approx.)	8 5⁄8" ⋅	3" ⋅ 11 15⁄16" (219 (W) ⋅		76 (H) ⋅	303 (D) mm) (main body only)
	8 3⁄4" ⋅	3 1⁄4" ⋅ 12 1⁄2" (223 (W) ⋅		83 (H) ⋅	318 (D) mm) (including adjustment feet
	and projecting parts)
Weight (approx.)	5.8 lbs. (2.6 kg)
Supplied accessories	Remote control, Two R-03 batteries, Power cord for U.S., Canada etc. (6', 1.8 m), Power
	cord for Europe, except U.K. (6', 1.8 m), Power cord for U.K., Hong Kong and Singapore (6',
	1.8 m), Power cord for Australia, New Zealand and Oceania (6', 1.8 m), DVI to 15-pin D-sub
	cable (6', 1.8 m), USB cable (6', 1.8 m), Carrying case, Lens cap (attached), Lens cap
	strap, Terminal cover (attached), CD-ROM, Operation manual, Quick reference guides
Replacement parts	Lamp unit (Lamp/cage module) (BQC-PGM20X//1), Remote control (RRMCGA013WJSA),
	Two R-03 batteries (“AAA” size, UM/SUM-4, HP-16, or similar), Power cord for U.S., Canada
	etc. (QACCDA007WJPZ), Power cord for Europe, except U.K. (QACCV4002CEZZ), Power
	cord for U.K., Hong Kong and Singapore (QACCBA012WJPZ), Power cord for Australia,
	New Zealand and Oceania (QACCL3022CEZZ), DVI to 15-pin D-sub cable
	(QCNWGA010WJZZ), USB cable (QCNWG0001WJPZ), Carrying case
	(GCASN0005CESA), Lens cap (CCAPHA001WJ01), Lens cap strap (UBNDT0013CEZZ),
	Terminal cover (GCOVD0103CESA), CD-ROM (UDSKAA009WJZZ), Operation manual
	(TINS-A209WJZZ), Quick reference guides

* Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated.

This SHARP projector uses a DMD panel. This very sophis-	This unit has some inactive pixels within acceptable toler-
ticated panel contains 480,000 pixels. As with any high tech-	ances which may result in inactive dots on the picture screen.
nology electronic equipment such as large screen TVs, video	This will not affect the picture quality or the life expectancy
systems and video cameras, there are certain acceptable	of the unit.
tolerances that the equipment must conform to.

Specifications are subject to change without notice.

Appendix

-79