Sharp PG-M20S Using an RGB Monitor Loop-out Adaptor, Displaying the Lamp Usage Time

Using an RGB Monitor Loop-out Adaptor

Using an RGB monitor loop-out adaptor (sold separately) and an RGB cable (commercially available), be sure to set to “ Yes (Y Cable)” when you want to display computer images both on the projector and on a monitor.

Using a RGB Monitor

Loop-out Adaptor

Select “Monitor Out” in the “Options (1)” menu ➝ For settings, see page 38.

Note

•Be sure to set to “ Disable” when not using an RGB monitor loop-out adaptor.

•If the setting is not correct, the image may be dark, too bright or whitish. This does not indicate malfunction.

•Make sure to set to “ Yes (Y Cable)” when using the RGB monitor loop-out adaptor.

Displaying the Lamp Usage Time

Confirming the Lamp Usage Time

Lamp Usage Time

This function allows you to check the lamp us- age time.

Select “Options (2)” menu to see the lamp usage time.

Note

•It is recommended that the lamp be changed after approximately 1,900 cumu- lative hours of use.

For lamp replacement, contact your near- est Sharp Authorized Projector Dealer or Service Center.

-58