
4 Remove the lamp unit.
•Loosen the securing screws from the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow.
5 Insert the new lamp unit.
•Press the lamp unit firmly into the lamp unit compartment. Fasten the secur- ing screws.
6 Attach the lamp unit cover.
•Slide the lamp unit cover in the direc- tion of the arrow. Then tighten the user service screw.
Info
•If the lamp unit and lamp cover are not cor- rectly installed, the power will not turn on, even if the power cord is connected to the projector.
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
1 Connect the power cord.
•Plug the power cord into the AC socket of the projector.
2 Reset the lamp timer.
•While pressing simultaneously
, , and
on the projec-
tor, press on the projector.
•“LAMP 0000H” is displayed, indicating that the lamp timer is reset.
Info
•Make sure to reset the lamp timer only when replacing the lamp. Otherwise, this may cause the lamp to become damaged or explode.
Securing screw
User service screw
AC socket
POWER button
buttons
Appendix
ENTER button