Sharp PG-M20S Connecting the Projector to Other Devices, Before Connecting, A computer using

Connecting the Projector to Other Devices

Before Connecting

Note

•Before connecting, be sure to turn off both the projector and the devices to be connected. After making all connections, turn on the projector and then the other devices.

When connecting a computer, be sure that it is the last device to be turned on after all the connections are made.

•Be sure to read the operation manuals of the devices to be connected before making connections.

This projector can be connected to:

A computer using:

■A DVI to 15-pin D-sub cable (See page 21.)

■ A DVI cable (type AN-C3DV) (sold separately) (See page 22.)

Component video or audio-visual equipment:

■ A DVD player or DTV* decoder (See page 23.)

■ A VCR, Laser disc player or other audio-visual equipment (See page 24.)

*DTV is the umbrella term used to describe the new digital television system in the United States.

A monitor using:

■ An RGB monitor loop-out adaptor (AN-A1MY) (sold sepa- rately) and an RGB cable (commercially available). (See page 25.)

Connecting the Power Cord

1 Plug in the supplied power cord into the AC socket on the rear of the projector.

Supplied	Power cord
accessory

-20