U N P A C K I N G A N D I N S T A L L A T I O N I N S T R U C T I O N S
8 PREPARATION AND USE OF THE CARTON TO ASSIST | Figure 10 |
IN THE INSTALLATION OF THE MICROWAVE OVEN |
|
Utilization of the carton may make installation easier.
1.Place carton upside down. See Figure 10.
2.Using cutting line around the carton, cut into two pieces (A) and (B). See Figure 11.
3. Position oven to assist in mounting to the wall. See Figure 12. | Top Side | Cutting Line |
(A)
Figure 11
Figure 12
(B)
MOUNTING OVEN TO THE WALL | Figure 13 |
|
Two people are recommended to attach the Microwave Oven to the
Mounting Plate.
1. Thread the Power Supply Cord through the hole made in the bottom of the top cabinet. Install the oven by snapping it onto the Mounting Plate. See Figure 13.
2. Use two Tapping Screws 5 to secure the levers that are on the bottom of the oven. See Figure 14.
3. Use two Top Cabinet Screws 3 and two Flat Washers 6, supplied in the INSTALLATION HARDWARE, to attach the unit to the top cabinet. See Figure 15.
4. Make a bundle of the Power Supply Cord and attach it to the inside of the cabinet using the Power Cord Hanger 4. See Figure 15.
Figure 14
Figure 15
3 4 
6
NOTE:
Screw length has been designed to accommodate 3/8" and above cabinet depth. If less, screw must be cut to required length.
10
