Special Note for the Turntable Support and Turntable
To avoid arcing, carefully read before placing the turntable support and turntable into the oven.
1.Place the turntable support, with the engraved word "Top" facing up, securely within the three pins on the turntable motor shaft. See Figures 1 and 2. See Figure 3 to check for the correct placement.
Figure 1 Turntable support
Figure 2 | Figure 3 Turntable support | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Turntable motor shaft | The pins of the turntable motor shaft |
|
2.Place the turntable on the turntable support. The turntable should be place so that all three rollers of the turntable support come in contact with the flat, underside surface of the turntable. Refer to the chart below to ensure correct placement.
CORRECT | INCORRECT |
Flat surface of the turntable | Flat surface of the turntable |
Underside
view
Rollers of the turntable support | Not on flat surface |
|
|
Flat surface of the turntable | Flat surface of the turntable |
Side view
Rollers of the turntable support
Rollers of the turntable support
9