Sharp R-930AW Before Operating, Manual Operation, To Set The Clock, Stop/Clear, Microwave Cooking

BEFORE OPERATING

*Before operating your new microwave oven make sure you read and understand this operation manual completely.

*Before the oven can be used, follow these procedures:

1)Plug in the oven. Close the door. The display will say SHARP SIMPLY THE BEST PRESS CLEAR

AND PRESS CLOCK.

2)Touch the STOP/CLEAR pad.

will appear. 3) Touch CLOCK pad.

TO SET THE CLOCK

*Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.):

Procedure

1.	CLOCK	Touch CLOCK
		pad.
2.		Enter the correct
		time of day by
		touching the
		numbers in
		sequence.
3.		Touch CLOCK
	CLOCK
		pad again.

This is a 12 hour clock. If you attempt to enter an incorrect clock time, ERROR will appear in the display. Touch the STOP/CLEAR pad and re-enter the time.

*If the electrical power supply to your microwave oven should be interrupted, the display will intermittently show SHARP SIMPLY THE BEST PRESS CLEAR AND PRESS CLOCK after the power is reinstated. If this occurs during cooking, the program will be erased. The time of day will also be erased. Simply touch STOP/CLEAR pad and reset the clock for the correct time of day.

STOP/CLEAR

Touch the STOP/CLEAR pad to:

1.Erase if you make a mistake during programming.

2.Cancel kitchen timer.

3.Stop the oven temporarily during cooking.

4.Return the time of day to the display.

5.Cancel a program during cooking, touch twice.

MANUAL OPERATION

MICROWAVE COOKING

Time Cooking

Your oven can be programmed for 99 minutes 99 seconds (99.99). Always enter the seconds after the minutes, even if they are both zeros.

*Suppose you want to cook for 5 minutes at 100%:

Procedure

1.	Enter cooking
	time.

2.	START	Touch START
	TOUCH ON	pad.

There are eleven preset power levels.

Using lower power levels increases the cooking time which is recommended for foods such as cheese, milk and long slow cooking of meats. Consult cookbook or recipes for specific recommendations.

Touch POWER	Approximate	Common
LEVEL Pad	Percentage	Words
Once,	of Power	for
then Touch		Power Levels
POWER
LEVEL	100%	High
9	90%
8	80%
7	70%	Medium High
6	60%
5	50%	Medium
4	40%
3	30%	Med. Low/Defrost
2	20%
1	10%	Low
0	0%

* Suppose you want to defrost for 5 minutes at 30%:

			Procedure
1.				Enter defrosting
				time.
2.				Enter power
	POWER
	LEVEL			level.
3.
		START		Touch START pad.
	TOUCH ON

You can program up to 4 automatic cooking sequences. Follow directions on page 24. Note that POWER LEVEL must be entered first when programming multiple sequences.

11