Connecting to the monitor, Ethernet Connection | Sharp SND-5080

installation & connection

Connecting to the monitor

Connect the [VIDEO] port of the camera to the video input port of the monitor.

M In the initial installation of the camera, you can connect the camera to the monitor for checking the connection status.

You must set <Video Output> to <ON> before the display screen can be activated. (page 72)

Connect the monitor test cable to the output port of the monitor.

Ethernet Connection

Connect the Ethernet cable to the local network or to the Internet.

Power Supply

Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera.

J

M

Be careful not to reverse the polarity when you connect the power cable.

You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.

The instructions above are also applied to SND-5080/SND-5080F/SNV-5080.

38_ installation & connection

Image 38

Sharp SND-5080 user manual Connecting to the monitor, Ethernet Connection, Power Supply

Contents

Network Camera SNB-5000/SND-5080/SND-5080F/SNV-5080 Important Safety Instructions Overview Explanation of Graphical Symbols Risk of Electric Shock Do not Open Disconnection Device Do not place this apparatus near Do not block any ventilation openings Overview Contents Login How to use the Menu Key Camera Menu SetupConnecting to the Camera Installing Silverlight Runtime Video Memory 128MB or higher Product FeaturesRecomended PC Specifications WHAT’S Included Model Name Camera SNB-5000 Model NameLens Options not included CS Lens Front Side ConnectorAT a Glance SNB-5000 Description System PowerRear Side Alarm GND AT a Glance SND-5080 Appearance Terminals Alarm In / OutInside SD Memory Card Compartment for the SD memory card Components AT a Glance SND-5080F Inside Components AT a Glance SNV-5080 Alarm OUT Components Installing the camera Installation SND-5080Precautions before installation Installation & Connection Ceiling Mount Installation SND-5080FRemoving the dome cover To add an alarm cable Installation SNV-5080 Disassembling Optional Accessories for Installation Pole Mount ADAPTORSCX-300PM Installing on the ceiling directly Panning Tilting Lens rotation Mounting the CS lens Disconnect the power before proceedingMounting the Lens Mounting the C lens INSERTING/REMOVING AN SD Memory Card Connecting the Auto Iris Lens connectorFocusing Inserting an SD Memory Card Removing an SD Memory Card English Selecting a memory card that’s suitable for you What is a memory card?Memory Card Information not Included Memory Card Use Connecting with Other Device Power Network Monitor Out Ethernet Connection Connecting to the monitorPower Supply Connecting to Audio Input/Output Alarm I/O Wiring Diagram 5mA sink Connecting to the I/O port box 3 4 Local Network Connecting the Camera Directly to Local Area NetworkingConnecting to the camera from a local PC in the LAN  For setting the network type, refer to Interface. Connecting the Camera Directly to a Pppoe Modem IP Router IP Address Setup Buttons used in IP Installer URL Static IP SetupManual Network Setup Network connection and setup Category Camera #1 Camera #2 Auto Network SetupIf the IP router has more than one camera connected Http Port 10000 VNP Port 4520 4530 Dynamic IP Setup Dynamic IP Environment Setup Port Range Forward Port Mapping Setup Manual Port Range Forwarding Connecting to the Camera from a Shared Local PC Connecting to the Camera from a Remote PC VIA the Internet Ssdr Samsung Super Dynamic Range Setup HOW to USE the Menu KEYCamera Menu Setup Enter Ö / Ö / Ö Enter Move to Ssdr and select on White Balance Setup Custom Backlight Setup Set the BLC Level HLC Highlight Compensation Setup Tone Exposure Setup Brightness Select CAM Title Screen Display SetupSENS-UP Automatically senses OSD Color Select POS and specify where to display the camera titleWhen done, select END To cancel your input, select CLR Day/Night Mode Setup Duration Adjust the brightness Image Adjustment Login dialog should appear Connecting to the CameraUsing URL Normally, you would Login To check the Ddns address Installing Silverlight Runtime English Using the Live Screen To toggle the audio sound Using OSD Screen MenuTo capture the snapshot To toggle the microphone sound Playback Click Save Screenshot will be saved in the speciﬁed path To download SlimPlayer To check the information of the searched videoTo back up the searched video Click the About button Video Profile SetupAudio & Video Setup What is GOP size? To add a video profile Video Setup Interface Network SetupAudio Setup Port Ddns IP Filtering SSL Registering with Ddns Event Setup FTP/Email SD Record Alarm Input Video analysis English Specify the Transfer interval Click OK When done, click ApplyTime Schedule Date & Time System SetupProduct Information Change the current password for the administrator Upgrade/RebootFrom the Setup menu, select System tab Click User User To restore the backup settings, click Restore Select a backup ﬁle and click Open Log Camera Specification Ssnriii Weight Net PowerDimensions Net Items SNB-5000 Network Specification TCP/IP, HTTP, HTTPS, SSL, Dhcp Ddns Troubleshooting Problem Solution Alarm Video Transmission must be enabled Verify the settings in the following sequenceCheck Data & Time settings Video analysis setting GPL Software Linux kernel, busybox GPL/LGPL Software LicensePreamble We protect your rights with two steps Original authors reputations Page Page How to Apply These Terms to Your New Programs Fitness for a Particular Purpose See the GNU General Public License for more details Additional Deﬁnitions ƒ d Do one of the following Exception to of the GNU GPLConveying Modiﬁed Versions License ever published by the Free Software Foundation Combined LibrariesRevised Versions of the GNU Lesser General Public License Sales Network