yFactory default : Resets the system to the factory default.

-Except network parameter : Reset the other settings except for the interface/ port/DDNS/IP filtering settings.

-All : Resets all settings including the camera settings. (however, the log information will not be reset)

If you reset all settings, the IP address will be defaulted to 192.168.1.100.

yConfiguration backup & Restore : Backs up the current system settings before performing the restoration process.

yRestart : Restarts the system.

4.When done, click [Apply].

To perform the upgrade

1.Click [Upgrade].

2.Click [Browse] and specify a file to upgrade.

3.Click [Send].

4.The "UPGRADE" dialog appears where the progression will be shown in the bottom.

MIf you forcibly terminate the upgrade process, upgrade will not be completed properly.

To save the current settings and restore the backup settings

1.Click [Backup].

The Save As dialog should appear.

2.Specify the backup path with a proper file name, and click [Save].

The backup file will be saved to the specified path in the format of ".bin".

3.To restore the backup settings, click [Restore].

M SETUP SCREEN

English _85

Page 85
Image 85
Sharp SND-5080 user manual To restore the backup settings, click Restore