To use the IV analysis function according to the virtual line based rule

1.Set <IV analysis function> to <Enable>.

2.Set the event rule to <Virtual line based rules>.

3.Click a desired area in the video and drag it to the end point, and right-click it.

4.Select a desired <Virtual Line Rules>.

You can specify up to 3 event rules for the virtual line.

yRight : A movement from left to right in the virtual line will be detected.

yLeft : A movement from right to left in the virtual line will be detected.

yBoth : A movement in any direction in the virtual line will be detected.

5.Click [OK].

To cancel the existing line, right-click on the line and select [Delete] in the context menu.

6.When done, click [Apply].

To use the IV analysis function according to the defined area based rule

1.Set <IV analysis function> to <Enable>.

2.Set the event rule to <Defined area based rules>.

3.Select the vertex of a desired area, and right-click it to display the context menu.

4.Select a desired <Defined Area Rules>.

You can specify up to 3 defined area event rules.

yEntering : An event where a moving object passes through the defined area and enters inside will be detected.

yExiting : An event where a moving object passes through the defined area and exits outside will be detected.

yAppearing/Disappearing : An event will be detected where an object that has not existed in the area until the previous frame, suddenly appears or disappears in the area without passing through the defined area.

5.Click [OK].

To cancel the specified area, right-click on the area and select [Delete] in the context menu.

6.When done, click [Apply].

M SETUP SCREEN

English _81

Page 81
Image 81
Sharp SND-5080 user manual English