Sharp SND-5080 user manual Network Setup, Audio Setup, Interface

Audio Setup

You can configure the I/O settings of the audio source from the camera.

1.From the Setup menu, select the

<Audio & Video ( )> tab.

2.Click <Audio Setup>.

3.Adjust the audio I/O levels to your preference.

y Audio-In : Set the audio input value.

y Audio - Out : Set the audio output value.

4.When done, click [Apply].

NETWORK SETUP

Interface

1.From the Setup menu, select the

<Network ( )> tab.

2.Click <Interface>.

3.Set the <Interface> and <IPv6 Setup> as necessary.

y IP Type : Select an IP connection type.

-Manual : Specify the IP address, Subnet Mask, Gateway, DNS1, and DNS2.

-PPPoE : Specify the DNS1, DNS2, ID and password.

-DHCP : Specify the DNS1 and DNS2.

If you set it to <Manual>, you should specify the IP, Subnet Mask, Gateway, DNS 1 & 2 manually.

yMAC Address : Shows the MAC address.

yIP Address : Displays the current IP address.

ySubnet Mask : Displays the <Subnet Mask> for the set IP.

yGateway : Displays the <Gateway> for the set IP.

yDNS1/DNS2 : Displays the DNS(Domain Name Service) server address.

yIPv6 Use : Specify the use of IPv6.

yIPv6 Address : Obtains the IPv6 address to access the IPv6 network.

4.When done, click [Apply].

M SETUP SCREEN

English _73