Sharp UP-600 Prior to Entries, Preparations for Entries, Receipt and journal paper rolls

3Prior to Entries

Preparations for Entries

■Receipt and journal paper rolls

If the receipt and journal paper rolls are not set in the machine or there are low rolls, install new ones according to section “Installing and Removing the Paper Rolls” under “Operator Maintenance.”

■Receipt ON/OFF function

You can disable receipt printing in the REG mode to save paper using the receipt function. To disable receipt printing, press the Mkey and select RCP SW. from the menu to select an option, OFF. When the function is in the OFF status, the receipt off indicator “R” is highlighted.

NOTE	Your register will print reports regardless of the receipt state. This means that the receipt roll
	must be installed even when the receipt state is “OFF”.

■Cashier assignment

Prior to any item entries, a cashier must enter his/her cashier codes into the POS terminal. Follow the procedure shown below.

To sign on:

To sign off:

NOTE

(In case of secret code is 0000)

Cashier code			CASH	Secret code	CASH
			#		#
CASH	through	CASH
1		10

CASH

#

•If another cashier is signed on while a cashier is signed on, the latter will automatically be signed off.

•If you want to enter a cashier code before every transaction, consult your authorized SHARP dealer.

NOTE	• Your POS terminal can provide the cashier + clerk system or the clerk only system instead of
	current system (cashier only system). If you want to change the system, please consult your
	authorized SHARP dealer.
	Clerk assignment
	To sign on:					(In case of secret code is 0000)
		Clerk code			˚		Secret code	˚
		CLK	through	CLK
		1		10

To sign off: ˚

20